379474
24
Zoom out
Zoom in
Previous page
1/28
Next page
24
You can crisp up rolls by cutting the rolls in halves, using a sharp knife, and acti-
vating the Single-Side Taosting Function. Ensure, that the slices are max. 3 cm
thick and will not stick in the slots (see: ›Single-Side Taosting Function‹). Alterna-
tively, to toast rolls as a whole, place the rolls tray on the toaster and then place
the rolls on the rolls tray.
Smaller bread slices may be removed easier by lifting the on/off handle to the
HIGH LIFT position (ca. 2 cm above the idle position).
Ensure to make an even and smooth cut. Use a sharp bread knife for cutting.
Remove crumbs and protruding rims, especially when crisping up halved rolls.
WARNING: Never insert your fingers in the slots, while the toaster is connected
to the power supply. Always switch off and unplug the appliance and wait for the
appliance to cool, before removing any jammed bread or crumbs.
If bread sticks or jams in the slots, switch off (CANCEL button) and unplug the
toaster and let the toaster cool down. Then remove the bread slices carefully and
without violence. Ensure not to touch the heating elements on the sides of the slots
to avoid damage.
To check the doneness during the toasting process, just lift the on/off handle to the
HIGH LIFT position for a moment and, then lower the handle to the LIFT & LOOK
position again; this will not interrupt the toasting process.
The LED display of the appliance stays lit up until the power cord is removed from
the power outlet.
It is recommended to empty the crumb tray after each use to avoid crumbs beco-
ming charred and sticking on the crumb tray (see: ›Care and Cleaning‹). Do not
use the toaster without the crumb tray in place.
If one of the function buttons (DEFROST, REHEAT, or Single-Side Toasting) was
pressed, the toaster switches back to normal operation automatically after the
function program has finished.
THE DEFROST FUNCTION
The DEFROST function enhances the toasting time for toasting frozen bread.
1. Insert the frozen bread slices in the slots and select the desired browning.
2. Carefully press down the on/off handle until it engages in the LIFT & LOOK posi-
tion.
3. Press the DEFROST button. The power indicator of the button illuminates.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42404 design advanced at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42404 design advanced in the language / languages: English, German as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gastroback 42404 design advanced

Gastroback 42404 design advanced User Manual - German - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info