512658
41
Zoom out
Zoom in
Previous page
1/44
Next page
41
CLEAR A BLOCKING
If the worm housing is blocked no mince comes out of the mincer while operating or the
motor stops moving automatically because of the overload protection.
ATTENTION: If a blocking occurs turn off the appliance immediately. Clear the pro-
blem before turning on the motor again.
1. Turn the appliance off and take the pusher out of the feed chute.
2. If the motor stopped running because of overloading, turn the appliance off and wait
few minutes to allow the motor to cool down.
3. Turn the control switch to reverse and let the motor run in reverse mode for a few
seconds. The worm will turn backwards and loosen the blockage. The appliance
will only run in reverse mode as long as you hold on to the control switch.
ATTENTION: If the motor does not start moving backwards immediately turn off the
appliance and pull the plug. Disassemble and clean the appliance.
4. After a few seconds in reverse mode turn the appliance off and wait a few seconds
for the motor to stop running completely. Turn the control switch to ON. If the appli-
ance still does not run smooth or the blockage occurs again, turn the appliance off
(by turning the control switch to STANDBY), pull the plug and clean the appliance
according to the instructions in chapter ›Care and Cleaning‹.
STORAGE
Always clean the appliance before storing.
ATTENTION: Store and use the appliance in a clean, frost free environment where
it is protected from dampness, moistness and immoderate and extraordinary burden
(such as: downfall, beat, overheating, moisture in the motor housing). Never lay heavy
or hard objects on top of the appliance.
Always assemble the appliance for storing. This way the parts are protected and can-
not get lost.
Note:
You can store the grinding discs inside the pusher (see picture).
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 41409 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 41409 in the language / languages: English, German as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gastroback 41409

Gastroback 41409 Manual - German - 2 pages

Gastroback 41409 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info