512652
45
Zoom out
Zoom in
Previous page
1/48
Next page
45
Problem Solution
After cleaning the motor does not get started again
when turning the appliance ON.
• Is the power cord plugged in?
• The motor might be blocked with some hard sub-
stance (for example a bone). Turn the appliance off
immediately and pull the plug.
• Disassemble and clean the appliance. Operate accor-
ding to the instructions ´Care and cleaning`.
• If the problem is not solved after the cleaning, take
the appliance for technical maintenance and repair to an
authorised specialised reparation shop.
The mincer blocks up permanently while operating. • To ensure that the mincer does not seize, never
operate it under excessive pressure. Operate in a slow
and constant pace. Do not try to rush the procedure by
pushing down the meat with force.
• For mincing hard ingredients really fine start with the
grinding disc with the bigger holes. Mincing the second
time use the finer grinding disc.
The worm housing moves while operating The closing ring loosened. Turn the appliance off imme-
diately. Assemble the worm housing according to the
instructions ´Assemble for mincing`.
The mince leaks out at the side of the closing ring. The closing ring is not screwed on tight enough. Turn the
appliance off immediately and then pull the plug. Tigh-
ten the closing ring but do not overwind the winding.
If the problem still occurs disassemble and clean the
appliance.
CLEAR A BLOCKING
If the worm housing is blocked no mince comes out of the mincer while operating or the
motor stops moving automatically because of the overload protection.
ATTENTION: If a blocking occurs turn off the appliance immediately. Clear the problem
before turning on the motor again.
1. Turn the appliance off and take the pusher out of the feed chute.
2. If the motor stopped running because of overloading, press the power button to turn
the appliance off.
3. Press the reverse button and let the motor run in reverse mode for a few seconds. The
worm will turn backwards and loosen the blockage.
ATTENTION: If the motor does not start moving backwards immediately turn off the
appliance and pull the plug. Disassemble and clean the appliance.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 41406 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 41406 in the language / languages: English, German as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gastroback 41406

Gastroback 41406 Manual - German - 2 pages

Gastroback 41406 User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info