714697
40
Zoom out
Zoom in
Previous page
1/44
Next page
40
STORAGE
Assemble the blender jug for storage completely and correctly to avoid injury from
the blade and loss of parts. Place the blender jug onto the socket of the motor base.
In this way, the sealing ring, the knives and the drive wheel are protected best
against dirt and damage.
WARNING: Never place the bottom of the jug or the knives without the blen-
der jug on the motor base.
Important: Do not let the power cord slide across the floor and make sure that the
power cord does not hang or can be caught.
Store the appliance in a clean and dry place, where it is protected from excessive
loads (impact, shock, dirt, humidity) and inaccessible to small children. Do not place
hard or heavy objects on the appliance. The storage location should be protected
from frost and not be warmer than 40 °C.
TROUBLESHOOTING
The Vital Mixer is reliable and robust and will work smoothly usually when operated
properly. However, should a problem occur, you will able quite easily to eliminate
this in most cases. The following error table is intended to assist.
WARNING: Do not attempt to use this appliance for any other than the inten-
ded use, described in these instructions. Maintenance and repair of the appliance
must be performed only by an authorized service centre. Do not use the appliance
when it is probably damaged or is not working as expected.
Problem Solution
The motor stops
during operation
or can not be
turned on again.
Switch off the appliance immediately (turn the ON/OFF switch to position ›0‹), when the
motor stops unexpectedly or is stuck to prevent overheating. Then, check the following
points:
The motor operates only when the blender jug is properly and fully assembled. Make
sure that the blender jug is properly assembled.
Remove the blender jug from the motor base and clear gently with a wooden or plastic
spoon stuck pieces of food on the blade. Apply no violence not to damage the blades.
Shred hard ingredients (eg nuts, hard chocolate) outside of the mixer. Remove a part of the
ingredients from the blender jug and then try again with a higher speed level.
Attention: Do not overload the motor of the appliance with too hard or too large ingredients.
Do not over load the blender jug. Process solid ingredients possibly in several steps.
The mixer is not suitable for grating of nuts, chocolate or other hard ingredients.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40999 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40999 in the language / languages: English, German as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info