691376
12
Zoom out
Zoom in
Previous page
1/14
Next page
4
Open the Garmin Express application.
5
Connect your Xero device to your computer using a micro-
USB cable (Connecting the Device to Your Computer,
page 8).
6
From the Garmin Express application, click Add a Device.
The Garmin Express software detects your device.
7
Click Add Device.
8
Follow the on-screen instructions to register your device and
add it to the Garmin Express software.
When setup is complete, the Garmin Express software
searches for software updates for your device.
9
Select an option:
To install all available updates, click Install All.
To install a single update, click View Details, and select
an update.
10
When the software update is complete, disconnect the device
from your computer.
11
Reinstall the battery door.
The device installs the software update.
Connecting the Device to Your Computer
Before you can connect the device to your computer, you may
need to remove optional mount accessories.
1
Using a 5/64 inch hex wrench, loosen the four screws
securing the battery door.
2
Remove the battery door, and set it aside.
NOTE: Do not remove the batteries.
3
Plug the small end of the USB cable into the USB port
À
on
the device.
4
Plug the large end of the USB cable into a computer USB
port.
5
If the bow sight is turned off, press to turn on the device.
The bow sight enters USB mass storage mode.
Device Care
NOTICE
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Cleaning the Device
1
Dampen a soft, clean, lint-free cloth with fresh water.
2
Gently wipe the device.
Getting More Information
You can find more information about this product on the Garmin
website.
Go to support.garmin.com.
Go to www.garmin.com/outdoor.
Go to http://buy.garmin.com, or contact your Garmin dealer
for information about optional accessories and replacement
parts.
Troubleshooting
The point of impact moves between shots
There are several factors that can cause variations in the point
of impact.
Verify the screws that connect the mount to the riser are
tightened to the maximum torque specification of 6.7 N-m (60
lbf-in) and the mount cannot be moved on the bow.
NOTE: Do not exceed the bow manufacturer's recommended
torque values.
Verify each adjustment point on the mount is tightened to the
maximum torque specification of 2.2 N-m (20 lbf-in).
Verify you are using the correct arrow profile for the arrow
you are using (A1i models only).
Range your shots consistently at full draw or at rest.
Inspect your bow and confirm all components are in good
working condition.
Always use consistent form when shooting a bow. Variations
in stance and peep sight placement can affect accuracy.
My device only displays fixed pins
When the batteries are low or do not meet the minimum power
requirements for the laser rangefinder, the device allows only
fixed pin sighting.
Verify the battery level of the batteries you have installed.
Verify you are using AAA lithium batteries.
Tips for Consistent Ranging
If you are a target shooter, consistent ranging can help to
increase your accuracy.
Use the rangefinder consistently while you are using the
same form (at full draw or at rest).
Enable decimal precision (Units Settings, page 7).
Verify you are aiming the reticle at the target when you
release the ranging trigger.
Resetting the Device
If the device stops responding, you may need to reset it. This
does not erase any of your saved data or settings.
1
Hold for 12 seconds.
The device turns off.
2
Hold for one second to turn on the device.
8 Device Information
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Xero A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Xero A1 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Xero A1

Garmin Xero A1 User Manual - German - 16 pages

Garmin Xero A1 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info