589582
1
Zoom out
Zoom in
Previous page
1/4
Next page
vívohub
Instructions
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Device Overview
The vívohub device is an ANT
®
to WiFi
®
wireless bridge created
to support Garmin
®
wellness products. Using ANT wireless
protocol, the vívohub device automatically detects and connects
to compatible activity trackers. User data uploads to Garmin
Connected Services over a wireless connection automatically.
User data is available for review on Garmin Connect
or through
your wellness partner (if applicable). The vívohub device is
installed as a wireless client on an existing wireless network.
À
Red LED
Á
Green LED
Â
Micro-USB port
Status LEDs
LED State Description
Green
Double blink (normal
operating mode)
The device has power.
Off The device does not have power.
Red
Off (normal
operating mode)
The device has joined an existing
wireless network and is ready to sync with
compatible activity trackers.
Solid The device is initializing.
Fast blink The device is searching for a network
connection.
vívohub Specifications
Network connectivity WiFi wireless technology only (no models with
RJ-45)
USB connector type USB 2.0 Micro-B
Power type 4.7 to 6.4 V USB (500 mA max. current)
Ethernet to USB converter when using
switchport Power over Ethernet (POE) (if
desired)
WiFi radio protocol IEEE 802.11 b/g/n compatible
11 Mbps maximum data rate
WiFi RF output
(typical)
9 dBm internal power amplifier
ANT radio frequency
band
2.4 GHz ISM (from 2.40000 to 2.4835 GHz)
ANT wireless communications protocol
Maximum ANT radio
data rate
20 Kbps
Operating temperature
range
From -10° to 50°C (from 14° to 122°F) (indoor
use only)
Dimensions W × H × D: 6.7 x 4.0 x 1.5 mm (2.7 x 1.6 x
0.7 in.)
Security WPA-PSK and WPA2-PSK (TKIP/AES)
Installing and Maintaining the Device
How is the device monitored?
Monitor the device using Garmin Connected Services.
NOTE: Monitoring via SNMP is not supported.
Visually inspect the status LEDs to determine the power and
connection status of the device (Status LEDs).
How is the device configured?
The vívohub configuration utility sets up connectivity to Garmin
Connected Services and configures the device to join a wireless
network.
1
Download and install the vívohub configuration utility on your
computer (Configuring Network Settings).
NOTE: The configuration utility is supported only on
Windows
®
operating systems.
2
Connect the device to the computer using the micro-USB
connector.
3
Follow the on-screen instructions to configure the device.
How is the device updated?
The Garmin vívohub firmware loader is used to update the
device when a firmware update is available (Updating Firmware
and Verifying Firmware Version).
How does the device communicate and what can be
done to ensure connectivity?
The device sends data to Garmin Connected Services using
HTTPS over port 443. Garmin Connected Services does not
initiate communication to vívohub devices. The device also
synchronizes time to your selected network time server using
SNTP (Simple Network Time Protocol) over UDP (User
Datagram Protocol) on port 123. An SNTP time server
hostname or IP address must be provided during configuration
in order for the device to operate. For more information, see
Network Settings.
1
Allow the vívohub device to access the Internet.
2
If necessary, make a firewall, captive portal, or Internet proxy
exception to allow the device to communicate with Garmin
Connected Services and your selected time server.
You must make exempt gcsgateway.garmin.com:443 (TCP,
Transmission Control Protocol) to enable communications
with Garmin Connected Services. If an external SNTP time
server is used, you must make an exception to access the
selected time server using UDP on port 123.
Where should the device be installed?
The device placement depends on the number of devices being
used, the size of your facility, the employee movement and
location patterns, and the frequency of data collection. For more
information, see Installation Considerations.
Install the devices in common areas.
TIP: In some facilities, you can install a device in a single
common corridor. In other facilities, you should install multiple
devices to accommodate employee needs.
Install each device on a wall or ceiling.
February 2015
Printed in Taiwan 190-01735-02_0D
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Vivohub at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Vivohub in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Vivohub

Garmin Vivohub User Manual - German - 6 pages

Garmin Vivohub User Manual - Dutch - 6 pages

Garmin Vivohub User Manual - French - 6 pages

Garmin Vivohub User Manual - Spanish - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info