691438
1
Zoom out
Zoom in
Previous page
1/6
Next page
PANOPTIX
LIVESCOPE
INSTALLATION
INSTRUCTIONS
Important Safety Information
WARNING
See the Important Safety and Product Information guide in the
chartplotter product box for product warnings and other
important information.
You are responsible for the safe and prudent operation of your
vessel. Sonar is a tool that enhances your awareness of the
water beneath your boat. It does not relieve you of the
responsibility of observing the water around your boat as you
navigate.
CAUTION
Failure to install and maintain this equipment in accordance with
these instructions could result in damage or injury.
Always wear safety goggles, ear protection, and a dust mask
when drilling, cutting, or sanding.
NOTICE
When drilling or cutting, always check what is on the opposite
side of the surface.
To obtain the best performance and to avoid damage to your
boat, you must install the Garmin
®
device according to these
instructions.
Read all installation instructions before proceeding with the
installation. If you experience difficulty during the installation, go
to support.garmin.com for more information.
Registering Your Device
Help us better support you by completing our online registration
today. Keep the original sales receipt, or a photocopy, in a safe
place.
1
Go to my.garmin.com/registration.
2
Sign in to your Garmin account.
Software Update
You must update the software when you install this device.
If your Garmin chartplotter has WiFi
®
technology, you should
update the software using the ActiveCaptain
app on a
compatible Android
or Apple
®
device. If your chartplotter does
not have has WiFi technology, you should update the software
using a memory card and a Windows
®
computer.
For more information, go to support.garmin.com.
Tools Needed
Drill
4 mm (
5
/
32
in.) and 3.2 mm (
1
/
8
in.) drill bits
Masking tape
#2 Phillips screwdriver
Marine sealant
32 mm (1
1
/
4
in.) hole saw (optional)
Cable ties (optional)
Mounting Considerations
You must angle the transducer correctly for your selected
mode to work properly.
You must install the sonar module in a location with adequate
ventilation where it will not be exposed to extreme
temperatures.
You should mount the transducer in a location where it will
not be jarred when launching, hauling, or storing.
You should mount the transducer in a location where it is not
behind strakes, struts, fittings, water intake or discharge
ports, thru-hull transducers, or anything that creates air
bubbles or causes the water to become turbulent. Turbulent
water may interfere with the sonar beam.
You should mount the transducer as close to the center line
of the boat as possible.
When mounted farther from the center of the transom, a
greater deadrise can cause the boat hull to interfere with
the sonar beam , and can cause inconsistent detection on
the opposite side of the boat
. The transducer is shown
from behind.
On single-drive vessels, you must not mount the transducer
in the path of the propeller.
On twin-drive vessels, you should mount the transducer
between the drives, if possible.
You should mount the sonar module in a location where the
LEDs are visible.
You should mount the sonar module in a location where the
cables can be easily connected.
Cable Considerations
NOTICE
Separating the Siamese cables near the rotating joint on a
cable-steered trolling motor reduces stress and extends the life
of the cables.
Zip ties and cable clamps can over-tighten and damage or break
the cable, or cause cable fatigue due to repeated rotation of the
motor.
You should use black electrical tape to secure the cables above
and below the rotating joint. If you secure the cables with zip
ties, do not over-tighten the zip ties.
You should secure the cables above and below the pivot joint of
your trolling motor.
You should create a service loop at least 25 cm (10 in.) long in
the cables, with the rotating joint centered on the loop.
You should use the included tool, a flathead screwdriver, or a
blunt knife to separate the cables.
May 2019
190-02210-90_0C
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Panoptix Livescope at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Panoptix Livescope in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Panoptix Livescope

Garmin Panoptix Livescope Installation Guide - German - 6 pages

Garmin Panoptix Livescope Installation Guide - Dutch - 6 pages

Garmin Panoptix Livescope Installation Guide - French - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info