522189
24
Zoom out
Zoom in
Previous page
1/26
Next page
Appendix
20 GHC 10 Owner’s Manual

  
No rudder position feedback sensor detected The autopilot can't detect a rudder feedback device or valid
rudder position.
Alarm sounds for 5 seconds
Drive unit is disabled
Autopilot transitions to Standby
Rudder position data is invalid. The autopilot loses valid rudder position feedback data. Alarm sounds for 5 seconds
Drive unit is disabled
Autopilot transitions to Standby
Autopilot is not receiving navigation data.
Autopilot placed in heading hold.
The autopilot is no longer receiving valid navigation data
while performing a Route-To.
This message will also be shown if navigation is stopped on a
chartplotter prior to disengaging the autopilot.
Alarm sounds for 5 seconds
Autopilot transitions to heading hold
Connection with autopilot lost The GHC lost connection with CCU. N/A
Lost wind data The autopilot is no longer receiving valid wind data. Alarm sounds for 5 seconds
Autopilot transitions to heading hold
Low GHC supply voltage The supply voltage level is below the value specied in the
low voltage alarm menu.
N/A
Rudder sensor is not calibrated. The drive unit rudder sensor has not been calibrated.
Calibrate the rudder.
Alarm sounds for 5 seconds
Drive unit is disabled
Autopilot transitions to Standby
Rudder near limit. Center the rudder. The rudder remains near its limit (rudder stop) for more than
5 seconds.
Sounds alarm
Continues in normal operation
"Rudder near limit" ashes on the title bar The autopilot has driven the rudder near its limit (rudder stop).
The autopilot cannot drive the rudder further in this direction.
Continues in normal operation
Warning! A gybe has been initiated. Would you
like to continue?
The autopilot has detected that the user has attempted to
initiate a gybe.
Sounds alarm
GHC 10 prompts for user input. Selecting
 initiates the gybe, and selecting
 cancels the gybe.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GHC10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GHC10 in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GHC10

Garmin GHC10 Quick start guide - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info