Manual Garmin Edge Explore 820 (page 7 of 20) (English)

657430

Zoom out

Zoom in

1/20

You can swipe down from the top of the data screens to view

the connections screen.

If necessary, tap the screen to view the timer overlay.

Select to stop the timer.

TIP: Before you save this ride and share it on your Garmin

Connect account, you can change the ride type. Accurate

ride type data is important for creating bike friendly courses.

Select Save Ride.

Select .

Acquiring Satellite Signals

The device may need a clear view of the sky to acquire satellite

signals. The time and date are set automatically based on the

GPS position.

Go outdoors to an open area.

The front of the device should be oriented toward the sky.

Wait while the device locates satellites.

It may take 30–60 seconds to locate satellite signals.

Locations

You can record and store locations in the device.

Marking Your Location

Before you can mark a location, you must locate satellites.

If you want to remember landmarks or return to a certain spot,

you can mark a location.

Go for a ride.

Select Where To? > > Mark Location > .

Saving Locations from the Map

Select Where To? > > Search Select Area > A Map

Point.

Browse the map for the location.

Select the location.

Location information appears at the top of the map.

Select the location information.

Select > .

Navigating to a Location

Select Where To?.

Select an option:

• Select Search Tools to navigate to a point of interest, city,

intersection, or known coordinates.

• Select Addresses to enter a specific address.

• Select Saved Locations to navigate to a saved location.

• Select Recent Finds to navigate to one of the last 50

locations you have found.

• Select > Search Select Area to narrow your search

area.

Select a location.

Select Ride.

Follow the on-screen instructions to your destination.

Navigating to Known Coordinates

Select Where To? > Search Tools > Coordinates.

Enter the coordinates, and select .

Follow the on-screen instructions to your destination.

Navigating Back to Start

At any point during your ride, you can return to the starting point.

Go for a ride (Going for a Ride, page 2).

During your ride, select anywhere on the screen to view the

timer overlay.

Select > Where To? > Back to Start.

Select Along Same Route or Most Direct Route.

Select Ride.

The device navigates you back to the starting point of your

ride.

Stopping Navigation

Select anywhere on the screen to view the timer overlay.

Scroll to the map.

Select > .

Projecting a Location

You can create a new location by projecting the distance and

bearing from a marked location to a new location.

Select Where To? > Saved Locations.

Select a location.

Select the location information at the top of the screen.

Select > Project Location.

Enter the bearing and distance to the projected location.

Select .

Editing Locations

Select Where To? > Saved Locations.

Select a location.

Select the information bar at the top of the screen.

Select .

Select an attribute.

For example, select Change Elevation to enter a known

altitude for the location.

Enter the new information, and select .

Deleting a Location

Select Where To? > Saved Locations.

Select a location.

Select the location information at the top of the screen.

Select > Delete Location > .

Courses

You can send a course from your Garmin Connect account to

your device. After it is saved to your device, you can navigate

Navigation 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Edge Explore 820 in the language / languages: English as an attachment in your email.

The manual is 2,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Edge Explore 820

Garmin Edge Explore 820 User Manual - German - 22 pages

Garmin Edge Explore 820 User Manual - Dutch - 22 pages

Garmin Edge Explore 820 User Manual - French - 22 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Edge Explore 820 Manual

Product: