691274
7
Zoom out
Zoom in
Previous page
1/30
Next page
6
If necessary, use the 2 mm hex key to remove the two
screws on the back side of the mount
Ã
, remove and rotate
the connector, and replace the screws to change the
orientation of the mount.
7
Replace and tighten the screw on the handlebar connector.
NOTE: Garmin recommends tightening the screw so the
mount is secure, with a maximum torque specification of
7 lbf-in. (0.8 N-m). You should check the tightness of the
screw periodically.
8
Align the tabs on the back of the Edge device with the bike
mount notches
Ä
.
9
Press down slightly and turn the Edge device clockwise until
it locks into place.
Acquiring Satellite Signals
The device may need a clear view of the sky to acquire satellite
signals. The time and date are set automatically based on the
GPS position.
1
Go outdoors to an open area.
The front of the device should be oriented toward the sky.
2
Wait while the device locates satellites.
It may take 30–60 seconds to locate satellite signals.
Using the Backlight
Select any key to turn on the backlight.
Select to adjust the backlight brightness.
From the home screen, select one or more options:
To adjust the brightness, select > Brightness >
Brightness.
To adjust the timeout, select > Brightness > Backlight
Timeout and select an option.
Training
Going for a Ride
If your device was packaged with an ANT+ sensor, they are
already paired and can be activated during initial setup.
1
Hold to turn on the device.
2
Go outside, and wait while the device locates satellites.
The satellite bars turn green when the device is ready.
3
From the home screen, select .
4
Select an activity profile.
5
Select to start the timer.
NOTE: History is recorded only while the timer is running.
6
Select or for additional data screens.
7
If necessary, select to view menu options such as alerts
and data fields.
8
Select to stop the timer.
TIP: Before you save this ride and share it on your Garmin
Connect account, you can change the ride type. Accurate
ride type data is important for creating bike friendly courses.
9
Select Save Ride.
Using the Shortcut Menu
Shortcut menu options are available for data screens and
accessory features. During a ride, appears on the data
screens.
Select to view the shortcut menu options.
Using Virtual Partner
®
Your Virtual Partner is a training tool designed to help you meet
your goals.
1
If necessary, enable the Virtual Partner screen for the activity
profile (Customizing the Data Screens, page 16).
2
Go for a ride.
3
Select to view the Virtual Partner screen to see who is
leading.
4
If necessary, select > Virtual Partner Speed to adjust the
speed of the Virtual Partner during your ride.
Segments
Following a segment: You can send segments from your
Garmin Connect account to your device. After a segment is
saved to your device, you can follow the segment.
NOTE: When you download a course from your Garmin
Connect account, all segments in the course are downloaded
automatically.
Racing a segment: You can race a segment, trying to match or
exceed your personal record or other cyclists who have
ridden the segment.
Training 3
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Edge 520 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Edge 520 Plus in the language / languages: English as an attachment in your email.

The manual is 4,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Edge 520 Plus

Garmin Edge 520 Plus User Manual - German - 32 pages

Garmin Edge 520 Plus User Manual - Dutch - 30 pages

Garmin Edge 520 Plus User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info