Manual Garmin Edge 510 (page 14 of 20) (English)

501751

Zoom out

Zoom in

1/20

• Select Start and Lap to trigger the lap counter at the GPS

location where you select and at any location during

the ride where you select .

• Select Mark and Lap to trigger the lap counter at a

specific GPS location marked before the ride and at any

location during the ride where you select .

If necessary, customize the lap data fields (page 9).

Marking Laps by Distance

You can use Auto Lap to automatically mark the lap at a specific

distance. This feature is helpful for comparing your performance

over different parts of a ride (for example, every 10 miles or 40

kilometers).

From the home screen, select > Activity Profiles.

Select a profile.

Select Auto Lap > Auto Lap Trigger > By Distance > Lap

At.

Enter a value.

If necessary, customize the lap data fields (page 9).

Using Auto Scroll

You can use the auto scroll feature to automatically cycle

through all of the training data pages while the timer is running.

From the home screen, select > Activity Profiles.

Select a profile.

Select Auto Scroll > Auto Scroll Speed.

Select a display speed.

Changing the Start Notice

This feature automatically detects when your device has

acquired satellites and is moving. It is a reminder to start the

timer so you can record your ride data.

From the home screen, select > Activity Profiles.

Select a profile.

Select Start Notice > Start Notice Mode.

Select an option:

• Select Once.

• Select Repeat > Repeat Delay to change the amount of

time to delay the reminder.

System Settings

Select > System.

• GPS Settings (page 10)

• Display Settings (page 10)

• Data Recording Settings (page 8)

• Unit Settings (page 10)

• Configuration Settings (page 10)

• Language Settings (page 10)

• Tone Settings (page 10)

GPS Settings

Training Indoors

You can turn GPS off when you are training indoors or to save

battery life.

From the home screen, select > System > GPS > GPS

Mode > Off.

When GPS is off, speed and distance are not available unless

you have an optional sensor that sends speed and distance

data to the device (such as the GSC 10). The next time you turn

on the device, it will search for satellite signals again.

Setting Your Elevation

If you have accurate elevation data for your present location,

you can manually calibrate the altimeter on your device.

From the home screen, select > System > GPS > Set

Elevation.

Enter the elevation, and select .

Viewing Satellites

The satellite page shows your current GPS satellite information.

For more information about GPS, go to www.garmin.com

/aboutGPS.

From the home screen, select > System > GPS > View

Satellites.

GPS accuracy appears at the bottom of the page. The green

bars represent the strength of each satellite signal received (the

number of the satellite appears below each bar).

Changing the Satellite Settings

By default, the Edge connects to GPS and GLONASS satellites

for increased performance in challenging environments and

faster position acquisition. You can set the device to use only

GPS satellites to increase battery life.

From the home screen, select > System > GPS > GPS

Mode.

Select an option:

• For increased performance, select GPS+GLONASS.

• For increased battery life, select GPS Only.

Display Settings

Select > System > Display.

Backlight Timeout: Adjusts the length of time before the

backlight turns off (page 2).

Color Mode: Sets the device to display day or night colors. You

can select Auto to allow the device to automatically set day

or night colors based on the time of day.

Screen Capture: Allows you to save the image on the device

screen.

Calibrate Screen: Aligns the screen to properly respond to

touches (page 12).

Data Recording Settings

Select > System > Data Recording.

Recording Interval: Controls how the device records activity

data. Smart records key points where you change direction,

speed, or heart rate. 1 Sec. records points every second. It

creates a very detailed record of your activity and increases

the size of the activity.

Data Averaging: Controls whether the device includes zero

values for cadence and power data that occur when you are

not pedaling.

Changing the Units of Measure

You can customize units of measure for distance and speed,

elevation, temperature, weight, position format, and time format.

Select > System > Units.

Select a measurement type.

Select a unit of measure for the setting.

Changing the Configuration Settings

You can modify all of the settings you configured in the initial

setup.

Select > System > Device Reset > Initial Setup.

Follow the on-screen instructions.

Changing the Device Language

From the home screen, select > System > Language.

Setting the Device Tones

From the home screen, select > System > Tones.

10 Customizing Your Device

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Edge 510 in the language / languages: English as an attachment in your email.

The manual is 3,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Edge 510

Garmin Edge 510 User Manual - German - 22 pages

Garmin Edge 510 User Manual - Dutch - 22 pages

Garmin Edge 510 User Manual - French - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Edge 510 Manual

Product: