661251
5
Zoom out
Zoom in
Previous page
1/34
Next page
Getting Started
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Install the camera memory card (Installing the Dash Camera
Memory Card, page 1).
Update the maps and software on your device (Updating
Maps and Software with Garmin Express, page 24).
Mount the device in your vehicle and connect it to power
(Mounting and Powering the Device in Your Vehicle,
page 1).
Align the dash camera (Aligning the Camera, page 2).
Acquire GPS signals (Acquiring GPS Signals, page 2).
Adjust the volume (Adjusting the Volume, page 2) and
display brightness (Adjusting the Screen Brightness,
page 2).
Navigate to your destination (Starting a Route, page 6).
Garmin DriveAssist Device Overview
À
Power key
Á
USB power and data port
Â
Camera memory card slot
Ã
Microphone for Voice Command or hands-free calling
Ä
Map and data memory card slot
Installing the Dash Camera Memory Card
Before the device can record video from the integrated dash
camera, you must install a camera memory card. The camera
requires a microSD
®
memory card from 4 to 64 GB with a speed
rating of Class 10 or higher. You can use the included memory
card, or you can purchase a compatible memory card from an
electronics supplier.
NOTE: A memory card is included so your device is ready to
use out of the box. All memory cards have a limited life and
must be replaced periodically. Your device alerts you when the
memory card has exceeded its useful life and needs to be
replaced. You can follow the troubleshooting tips to help extend
the useful life of the memory card (My memory card has
degraded and needs to be replaced, page 25).
1
Insert a memory card
À
into the camera memory card slot
Á
.
NOTE: If you install the memory card into the incorrect slot,
the camera cannot record video.
2
Press it in until it clicks.
Mounting and Powering the Device in Your
Vehicle
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Before you use your device on battery power, you should charge
it.
1
Plug the vehicle power cable
À
into the USB port on the
device.
2
Press the mount
Á
onto the suction cup
Â
until it snaps into
place.
The mount is reversible. If you are using the included
windshield suction cup, you should install the mount with the
socket toward the top of the device. If you are using an
optional dash mount accessory, you should install the mount
with the socket toward the bottom of the device. This ensures
the dash cam is not obstructed by the mount.
3
Press the suction cup to the windshield, and flip the lever
Ã
back toward the windshield.
4
Fit the tab on the mount into the slot on the back of the
device.
5
Press the device onto the mount until it clicks.
6
Plug the other end of the vehicle power cable into a power
outlet in your vehicle.
Turning the Device On or Off
To turn the device on, press the power key, or connect the
device to power.
To put the device in power saving mode, press the power key
while the device is on.
While in power saving mode, the screen is off and the device
uses very little power, but it can wake instantly for use.
TIP: You can charge your device faster by putting it in power
saving mode while charging the battery.
To turn off the device completely, hold the power key until a
prompt appears on the screen, and select Off.
Getting Started 1
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin DriveAssist 51 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin DriveAssist 51 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin DriveAssist 51

Garmin DriveAssist 51 User Manual - German - 40 pages

Garmin DriveAssist 51 User Manual - Dutch - 40 pages

Garmin DriveAssist 51 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info