589667
1
Zoom out
Zoom in
Previous page
1/2
Next page



See the Important Safety and Product Information guide in the GPS device
product box for product warnings and other important information.
Do not use a sharp object to remove user replaceable batteries. Contact your
local waste disposal department to properly recycle the batteries.
1. Locate the circular battery cover
on the back of the chirp.
2. Twist the cover counter-clockwise until it is loose enough to remove.
3. Remove the cover and the battery.
4. Place the new battery into the cover with the positive side facing the
inside of the cover.
5. Replace cover by aligning the dots
and rotating clockwise.

TIP: If you are programming multiple chirp accessories, install only one
battery at a time.

There are several ways to program your chirp. You must have a compatible
Garmin device in order to program the chirp.
1. From the geocaching settings on your Garmin device, enable chirp™
Searching.
2. From your Garmin device, select Program chirp™.
3. Select an option:
Select Show chirp™ Details to view and edit chirp information.
Select Send Waypoint to select a saved waypoint from your
compatible device.
Select Send Geocache to select a saved geocache from your
compatible device.
Select Erase to erase chirp data.

As the owner of the chirp, your device automatically creates a PIN-entry
to program the chirp securely. This prevents non-owners (nders) from
reprogramming your chirp. The PIN is the last ve digits of the unit ID from
the last Garmin device you used to program the chirp. To nd your unit ID,
refer to the owners manual for your Garmin device.
1. From the geocaching settings on your compatible Garmin device, enable
chirp™ Searching.
2. From your compatible Garmin device, select Program chirp™.
3. Enter the PIN.

1. From the geocaching settings on your compatible Garmin device, enable
chirp™ Searching.
2. From your compatible Garmin device, select Program chirp™.
3. Select Show chirp™ Details > Edit.
4. Select Change Name, Change Message, or Change Coordinates.

1. From the geocaching settings on your Garmin device, enable chirp™
Searching.
2. From your Garmin device, select Program chirp™.
3. Select Erase > Yes.

Use the adhesive mount when attaching the chirp to a container.
1. Attach one side of the adhesive mount to the center of the battery door.
2. Attach the other side of the adhesive mount to the top of the container.

Do not mount the chirp inside a metal container.
Do not bury the chirp.
Do not put the chirp in water.
A compatible Garmin device should detect the chirp within (32.9 ft)
10 m. For maximum transmission range, allow the chirp to have an
unobstructed view in all directions.
chirp Owners Manual
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Chirp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Chirp in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Chirp

Garmin Chirp User Manual - German - 2 pages

Garmin Chirp User Manual - Dutch - 2 pages

Garmin Chirp User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info