Manual Garmin BC35 (page 3 of 34) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

699110

Zoom out

Zoom in

1/34

If you do not see video on the Garmin device at the preferred

installation location, move the transmitter to another location

and test it again.

Repeat steps 2–3 until the transmitter operates correctly.

Test the camera view by observing the video on the device.

If the camera does not provide the optimal view for your

vehicle, move it to another location and test it again.

Repeat steps 5–6 until the camera mounting location

provides the optimal view for your vehicle.

TIP: Make note of the camera orientation when you are

testing the camera view to ensure correct permanent

installation.

Mounting the Camera

Before you permanently mount the camera, you should test the

mounting location for the optimal view for your vehicle (Testing

the Camera and Transmitter Location, page 2).

If you have already connected the camera to the bracket, you

must first disassemble it.

Place the bracket

in the mounting location.

Select an option:

• If you are mounting the bracket directly on the surface of

your vehicle, mark the locations of the two holes on the

bracket

• If you are installing the bracket on a license plate, remove

one of the license plate screws and clip the bracket onto

the license plate, aligning the hole on the bracket

with

the hole on the license plate.

Secure the bracket to the vehicle using either the included

self-tapping screws

or the license-plate screw you

removed in step 2

Place the camera in the bracket, and determine the best

place for the camera cable

to enter the vehicle.

Using an appropriate drill bit, drill a hole for the camera cable

to enter the vehicle.

Feed the camera cable through the hole and route it to the

transmitter location.

Secure the camera in the bracket using the included hex

bolts

Adjust the angle of the camera and tighten the hex bolts

using the included hex key.

Apply RV sealant around the cable where it enters the

vehicle (optional).

Installing the Transmitter

Before you permanently install the transmitter, you must test the

installation location for correct operation (Testing the Camera

and Transmitter Location, page 2).

Secure the transmitter to the installation location using

hardware appropriate for the location, such as screws, bolts,

or cable ties.

The fuse holder located near the transmitter is not

waterproof. Installing the fuse holder in a location that is

exposed to the elements is not recommended.

Connect the camera and transmitter cables.

The connector between the camera and the transmitter is not

waterproof. If you make this connection in a location exposed

to the elements, you must make sure that the connection is

waterproof.

Connect the power cable

from the transmitter to a 12–

24 VDC power source, preferably a reverse lamp

, using a

solderless wire-splice connector (not included).

NOTE: Connecting the transmitter to an always-on

12-24 VDC source (such as a running lamp) instead of a

reverse lamp requires you to manually switch power to the

transmitter. The transmitter may drain your vehicle battery if it

is left on.

If you did not use a solderless wire-splice connector, solder

and heat-shrink the electrical connections to protect them

from the elements.

Pairing the Camera with a Garmin Navigation

Device

Turn on the compatible Garmin navigation device, and bring

it within 3 m (10 ft.) of the camera.

Select Apps > Rear View.

Select Add New Camera.

Follow the on-screen instructions.

Multiple Cameras

You can pair up to 4 wireless cameras with a compatible Garmin

device. For example, you can pair one backup camera installed

on the cab and a second backup camera installed on a trailer.

See the BC

™

35 Owner's Manual for information about pairing

multiple cameras.

Appendix

Getting the Owner's Manual

You can get the most recent owner's manual from the web.

Go to garmin.com/manuals/BC35.

View or download the full owner's manual in your preferred

format.

Specifications

Camera and transmitter input

voltage

From 9 to 28 Vdc

Transmitter fuse 500 mA, fast-blow

Camera and transmitter current

usage

150 mA at 12 Vdc

Water rating (camera) IEC 60529 IPX7*

Installation Instructions 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin BC35 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin BC35

Garmin BC35 User Manual - English - 8 pages

Garmin BC35 User Manual - German - 8 pages

Garmin BC35 User Manual - Dutch - 8 pages

Garmin BC35 User Manual - French - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin BC35 Manual

Product: