691049
11
Zoom out
Zoom in
Previous page
1/14
Next page
2
Remove the mount base from the mounting surface, and use
a 3.2 mm (1/8 in.) drill bit to drill pilot holes in the two
locations you marked.
NOTICE
If you are drilling into a fiberglass surface, you may need to
use a specialized drill bit or drill counter-clockwise to avoid
damaging the fiberglass. For more information, contact your
vehicle manufacturer or a professional installer.
3
Apply waterproofing sealant around the drilled pilot holes,
and all the way around the edge of the back surface of the
mount base, where it will contact the vehicle.
You must use an outdoor waterproofing sealant that will bond
with your vehicle's exterior surface and not damage it. For
more information, contact your vehicle manufacturer or a
professional installer.
4
Place the mount base against the surface, aligning the
mounting holes in the base with the drilled pilot holes.
5
Fasten the mount base to the vehicle using two M4 screws.
NOTE: The included screws are intended for installation on a
camper with a fiberglass shell. You must verify the screws
are the correct length and appropriate for the exterior
mounting surface of your vehicle. For more information,
contact your vehicle manufacturer or a professional installer.
6
Fasten the camera clip to the mount base using the two pre-
installed screws .
Appendix 7
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin BC 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin BC 40 in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin BC 40

Garmin BC 40 User Manual - German - 14 pages

Garmin BC 40 User Manual - Dutch - 14 pages

Garmin BC 40 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info