724655
22
Zoom out
Zoom in
Previous page
1/24
Next page
173cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com 1800 909 909
MODEL No.: DM46E3P-D173 • 02/2018 • 59085 (toll free)
AFTER SALES SUPPORT
(toll free)
173cc 4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL No.: DM46E3P-D173 • 02/2018 • 59085
40 41
Accessories and After Sales parts
Should you nd the following accessories are worn or past their user life,
replacements can be purchased online via our website www.extrabattery.com.au
If you have any queries regarding these accessories,
please call us on our Customer Support Line: 1800 909 909.
* Note that Xnity Battery 55756 is also compatible with this product.
Note that Xnity Charger 51323 is also compatible with this product.
1. Replacement
4 x Swing Blades
(59085-BL)
4. Replacement 20V Li-Ion
Battery (51314/A200)*
2. Replacement
Side Discharge Chute
(59085-SDC)
5. Replacement Mulching
Block (59085-MB)
3.
Replacement Charger
Base + Plug Pack Charger
(JLH122200370S / Z10)
6. Replacement
Spark Plug (LG F7RTC)
7. Replacement Air Filter
(59085-AF)
Warranty Troubleshooting
* blade mounting
plate not included
Problem Possible Cause Solution
Engine does not start Fuel tank (25) is empty
Oil tank is empty
Spark plug (27)
Blades hitting the grass to be cut
Battery (8) is at
Check the fuel tank (25), and refuel if
required.
Check the level of the oil dipstick (24),
and if low or empty, add oil
Clean or replace if dirty or worn
Increase the cutting height of the mower
so the blades do not make contact with
the grass on start up
Charge the battery (8).
Cutting / Engine
performance
decreases
Cutting height
2 x blades (30) are dull or blunt
When using side discharge chute (20)
Hard catcher (13) is full
Increase the cutting height using the
8 height adjustment lever (18)
Replace the blades with new / sharp
blades.
Clean around the side ejector chute
NOTE: Always ensure the engine is turned
o before undertaking this task.
Empty hard catcher (13)
Hard catcher is not
lling up to optimum
level
Cutting height too low
When mulching, piles of grass are left
behind the mower
Grass is wet
2 x swing blades (30) are dull or blunt
Rear discharge chute (16) is blocked
Increase the cutting height using the
8 height adjustment lever (18)
Lift the height of the cutting depth by one
notch using the 8 height adjustment lever (18)
Allow the grass to dry before mowing
Sharpen or replace the 2 x swing blades (30)
Stop mower and clear the rear discharge
chute (16)
Troubleshooting.
Service Support
If you have any issues with the operation of your product, please take it with a copy
of your receipt to one of our National Service Agents for repair. A listing of our Service
Agents is included with your product, however, you can also nd our most updated
listing by visiting powertoolsupport.com, and clicking on the Service Agent link.
Alternately call us on our Customer Support line, 1800 909 909, for advice or support.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline DM46E3P-D173 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline DM46E3P-D173 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info