111709
2
Zoom out
Zoom in
Previous page
1/14
Next page
ENGLISH
9
Description of parts:
FIG. 01
1 Main switch
2 Manual dispensing / hot water button
3 Steam button
4 Dose programming/Coffee dispensing button
5 Correct temperature light
6 Turbo frother steam nozzle (removeable)
7 Filterholder
8 1 cup filter
9 Filter for pods
10 2 cup filter
11 Basin (removable)
12 “Perfect cream” Filter (OPTION)
13 Brewing head
14 Filterholder gasket
15 Overflowing protection hole
16 Shower disc
17 Tamper
18 Power cable and plug
19 Measuring spoon
20 Delivery spout
21 Tank cover
22 Grid (removable)
23 Cappuccino maker kit (OPTION)
24 Steam/hot water knob
25 Removable water tank
Instructions for the power supply
cord
A A short power-supply cord is provided to reduce risks of
getting tangled up or tripping over a longer cord.
B Longer extension cords are available and may be used if
care is exercised in their use.
C If a long extension cord is used:
1 the marked electrical rating of the extension cord
should be at least as great as the electrical rating of
the appliance.
2 if the appliance is of the grounded type, the extension
cord should be a grounding type
3 the cable does not hang from the table to avoid the
risk of getting caught up in it.
Preparation:
1. Remove the water tank cover (21) and fill the tank with
cold water checking the level through the tank window
shown in FIG. 02.
N.B.: The upper section of the tank (25) is provided with an
overflowing safety hole (15) in case of tank overfilling.
The water tank can also be removed (FIG.02), after
removing the tank cover (21).
Re-install tank with water and cover.
2. Insert plug (18) into a suitable wall outlet (see point 1
under “Caution”).
3. Push the main switch (1). The temperature light (5)
will ash until the temperature is reached; when the
temperature is reached the light will remain on.
Starting up
This procedure fills the water boiler with fresh water.
This should be done whenever the machine is switched on.
This machine, featuring a pump to brew coffee, is equipped
with a self-priming system.
Place an empty cup under the brewing head (13), do not
insert the filter holder and press the hot water/coffee switch
(2) (“1 Pos.).
You will hear the sound of the operating pump, and after
a few seconds, water will start flowing out of the brewing
head (13).
When the cup is filled press the hot water supply button (2)
again.
The Gaggia machine is now ready to be used.
Warning! Before removing the water tank,
make sure that the machine is off as not to
damage the self-primer.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia Espresso Color at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia Espresso Color in the language / languages: English, French as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info