718550
50
Zoom out
Zoom in
Previous page
1/124
Next page
CONCETTO
46/120
English
16 - TROUBLES, CAUSES AND CURES
Here is a list of the possible machine troubles.
The symbol in the cure box means that the operation must be carried out by the Maintenance Technician only.
TROUBLE CAUSE
CURE
The machine does not start
Display message:
DUMPDUMP
DUMPDUMP
DUMP
BOXBOX
BOXBOX
BOX
FULLFULL
FULLFULL
FULL
Grinder error
Instead of coffee only water is
brewed
No water or steam supply
Coffee flows too rapidly
Coffee flows too slowly
Coffee is not hot enough
Coffee has not enough cream
The machine requires too much time
to warm up, the water quantity is
reduced
The brew group cannot be removed
The brew group cannot be refit
No voltage
Dump box full
Coffee grinder unit blocked
The button selecting pre-ground coffee has
been pressed but the relative container has
not been filled with instant coffee.
The steam/hot water spouts hole is
clogged
Grinding is too coarse
Grinding is too fine
The cup has not been preheated
The machine has not yet reached the
suitable temperature
The coffee blend is not appropriate, coffee
is not fresh off the roasting, the coffee powder
has been ground too finely or too coarsely.
The machine circuit is clogged by scale
The brew group is not in the right position
(N)
The brew group is not in the right position
(N)
Check:
- if the plug is connected
- if the all-pole switch (if any) is on
- the system fuses
- the electric connections
Empty the dump box and reintroduce it
properly
Clean the coffee grinder (Pr. 14.1
Jamming of the coffee grinder unit)
Place the coffee dose in the relative hopper
and restart the cycle
Clean it with a thin needle
Set a finer grinding
Set a coarser grinding
Preheat the cup on the cup warming plate
Wait for the machine to reach the suitable
temperature
Change the coffee blend or check its
grinding (if pre-ground)
Descale the machine
Switch the machine on and off through the
main switch
Manually turn the group onto the standard
position (N), matching the reference mark
placed on the structure with the arrow N
(F. 14)
Downloaded from www.Manualslib.com manuals search engine
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia Concetto CAP002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia Concetto CAP002 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 6,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info