718548
56
Zoom out
Zoom in
Previous page
1/60
Next page
56
Instructions
Istruzioni
Machine actions Causes Solutions
There is a lot of ground co ee under or
over the brew group.
The co ee used may not be suitable for automatic
machines.
You may need to change the type of co ee or the co ee
grinder settings (see the “Adjusting the Ceramic Co ee
Grinder” chapter).
The machine is adjusting the co ee grinder for a
new kind of co ee beans or pre-ground co ee.
The machine automatically adjusts itself after brewing
several cups of co ee in order to optimise extraction in
relation to the compactness of ground co ee.
It may be necessary to brew 2 or 3 products to completely
adjust the co ee grinder.
This is not a machine malfunction.
The machine produces too humid or too
dry co ee grounds.
Adjust the co ee grinder. Adjusting the ceramic co ee grinder a ects the quality of
residues.
If the residues are too humid, set a coarser grind.
If the residues are too dry, set a  ner grind.
Refer to the “Adjusting the Ceramic Co ee Grinder” chap-
ter.
The machine grinds the co ee beans
but no co ee is brewed (see note).
There is no water. Fill the water tank and prime the circuit (see the "Manual
Rinse Cycle" chapter).
The brew group is dirty. Clean the brew group (see the “Weekly” section of the
“Brew Group Cleaning” chapter).
This might occur when the machine is automatically
adjusting the dose.
Brew some cups of co ee as described in the “Gaggia
Adapting System” chapter.
The dispensing spout is dirty. Clean the dispensing spout.
The co ee is too weak (see note). This might occur when the machine is automatically
adjusting the dose.
Brew some cups of co ee as described in the “Gaggia
Adapting System” chapter.
The ground co ee is too coarse. Change co ee blend or adjust grinding as explained in the
Adjusting the Ceramic Co ee Grinder” chapter.
Co ee is brewed slowly (see note). The co ee grind is too  ne. Change co ee blend or adjust grinding as explained in the
Adjusting the Ceramic Co ee Grinder” chapter.
The circuits are clogged. Perform a descaling cycle.
The brew group is dirty. Clean the brew group (see the “Weekly” section of the
“Brew Group Cleaning” chapter).
Co ee leaks out of the dispensing
spout.
The dispensing spout is clogged. Clean the dispensing spout and its holes.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia Babila RI9700 SUP046DG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia Babila RI9700 SUP046DG in the language / languages: English, Italian as an attachment in your email.

The manual is 4,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggia Babila RI9700 SUP046DG

Gaggia Babila RI9700 SUP046DG User Manual - English - 92 pages

Gaggia Babila RI9700 SUP046DG Quick start guide - German - 60 pages

Gaggia Babila RI9700 SUP046DG Quick start guide - Dutch - 60 pages

Gaggia Babila RI9700 SUP046DG Quick start guide - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info