510154
20
Zoom out
Zoom in
Previous page
1/24
Next page
20
2.4 STARTING
2.4.1 Press the multifunction button
and hold it down for about 3 seconds. All the lights
will come on and go off in a rapid order, then the on / off function pilot light
will come
on. The water heating up pilot light will flash to indicate that the water in the boiler
is heating up. Delivering coffee is impossible while this operation is on.
2.4.2. Let the air out of the water circuit by slowly turning the water / steam knob ( G )
anticlockwise until half a glass of water comes out of the nozzle ( C ). Turn the water /
steam knob clockwise to the 0 position.
This operation is essential when you use your
MILLENNIUM
for the first time, and has
to be repeated in case you run out of water or when you use your
MILLENNIUM
after a long
period of inactivity. After a long period of inactivity clean the water tank thoroughly, fill it with cold
water and let water out of the water / steam nozzle by turning the water / steam knob
anticlockwise in order to remove stale water from the water circuit. This operation will take about
2 minutes. Turn the water / steam knob clockwise to the 0 position.
Once the right water temperature has been reached, the water heating up pilot light
will go
off: your MILLENNIUM is ready to make coffee.
Set up the Espresso Coffee Machine following the instructions of chapter 10 in case it hasn't
been done.
2.5 HOW TO SWITCH MILLENNIUM OFF
- Press the multifunction button
and hold it down for about 3 seconds until all the lights
come on and then go off.
3. COFFEE BREWING
3.1 One coffee
- Place a cup under the coffee spout ( L ) ( FIG. D ).
Choose the type of coffee (weak / strong) by turning
the coffee regulation knob (see point 3.3).
Press the coffee button
(you will hear a beep).
MILLENNIUM will automatically make and deliver
the chosen espresso coffee.
FIG. D
You can stop the coffee delivery by pressing the multifunction button .
29
9. HOW TO DECALCIFY MILLENNIUM
At regular intervals,
MILLENNIUM must be decalcified.
a) Switch the unit off and unplug it.
b) Fill the water tank with a mixture of water and a liquid product suitable for decalcifying coffee
machines (for the right proportion see the product instructions).
c) Plug the unit in and switch it on.
d) Turn the water / steam knob anticlockwise and wait 2 minutes at least to make the mixture
enter the circuits.
e) Turn the water / steam knob clockwise to the 0 position.
f) Switch the unit off.
g) Wait 20 minutes at least.
h) Switch the unit on an repeat operations d to g twice (place a container under the water /
steam nozzle).
i) Rinse the water tank thoroughly and fill it with cold water.
l) Turn the water / steam knob anticlockwise so that the cold water enters and cleans the
circuits. Let at least 2 litres of water out of the water / steam nozzle.
WARNING! Use only products which are not toxic and are suitable for decalcifying coffee
machines. Rinse thoroughly.
Time needed to decalcify the unit can change according to the product used.
Read and follow the product instructions carefully.
G3 FERRARI disclaims responsability for damages due to the use of unsuitable products or
improper use.
10. ESPRESSO COFFEE MACHINE SETTING
MILLENNIUM is programmed by G3 FERRARI with standard parameters and it is sold it is
ready for use. The special function "SETTING", anyway, permits you to improve the performances
of the coffee machine according to the type of coffee you're using. The setting should be done
the first time it is used and each time you change type of coffee.
a) Switch off the coffee machine (in case it is on).
b) Press contemporary the switch on button
and the 2 cups coffee selection button .
c) Keep on pressing the 2 cups coffee selection button
.
d) More pilot lights turn on and bigger is the quantity of coffee that will be grounded. Release the
2 cups coffee selection button and the machine save the new setting.
e) Switch on the coffee machine.
f) Complete the setting by regulating also the coffee grinding (see chapter 6).
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for G3 Ferrari MILLENNIUM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of G3 Ferrari MILLENNIUM in the language / languages: English, French, Italian as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info