536036

G-rail RF Ontvanger 6045-2200-RTS voor G-Rail 6000-systemen Manual

5
Zoom out
Zoom in
Previous page
1/8
Next page
2
Initial programming
To program the first transmitter or channel, press and hold the program button on the back of
a Telis transmitter until the LED on the receiver turns off. Release the program button and the
LED will light again. Press and release the program button on the same transmitter again and
the LED will turn off and remain off. This transmitter is now memorized.
Programming additional transmitters
- Press and hold the programming button of a Telis transmitter that is already memorized by
the RTS receiver until the LED on the receiver turns on.
- Press and release the programming button on the new transmitter or channel. The LED on the
receiver will turn off, indicating this transmitter has been memorized.
Repeat this procedure for each transmitter or channel, up to 12 total.
Deleting a transmitter from memory
- Press and hold the programming button of a Telis transmitter that is already memorized by
the RTS receiver but not the one to be removed from memory. Continue holding the button
until the LED on the receiver turns on.
- Press and release the programming button on the transmitter or channel to be removed from
memory. The LED on the receiver will turn off, this transmitter will no longer operate the RTS
receiver.
Memory reset
Press and release the RESET button on the RTS receiver. The LED will turn on, indicating that
no transmitters or channels are memorized.
Operation
Pressing the UP button on the Telis transmitter will raise or retract the window treatment.
Pressing the DOWN button will lower or extend it.
Pressing the CENTER button will stop the window treatment.
DE
NL
EN
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for G-rail RF Ontvanger 6045-2200-RTS voor G-Rail 6000-systemen at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of G-rail RF Ontvanger 6045-2200-RTS voor G-Rail 6000-systemen in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info