97397
3
Zoom out
Zoom in
Previous page
1/8
Next page
3
INSTALLATION
Remove the (PTT) plug from the PTT socket.
Click the modular plug out of your existing phone and connect it to the
‘LINE’ input ( 1) of the FX-500.
Connect the supplied cable between the connection of your existing
phone that’s now free and the ‘PHONE’ output ( 2) of the FX-500.
You can now put the PTT plug back into the PTT socket.
The FX-500 must be “charged” for at least 2 minutes before you can
start programming.
If your existing phone is not provided with a modular connection but a
fixed connection, we recommend you to use a connector set such as the
Profoon ASN-1.
The FX-500 can also be used as a wall device. Above each other and
at a distance of 10cm, drill two holes in the wall and insert plugs and
screws. Leave the screws protrude for several millimetres.
Suspend the extra number dialler by sliding the cavities at the rear of the
device over the screws in the wall and pressing the FX-500 number dial-
ler downward.
Telephone
Number dialler
Phone
connection
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fysic FX-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fysic FX-500 in the language / languages: English as an attachment in your email.

The manual is 1.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fysic FX-500

Fysic FX-500 User Manual - German - 9 pages

Fysic FX-500 User Manual - Dutch - 8 pages

Fysic FX-500 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info