678950
24
Zoom out
Zoom in
Previous page
1/28
Next page
As soon as the temperature alert is reached, the icon with the temperature starts ashing ( or
) while an alert tone is emitted. Press a random button or wait for 2 minutes to stop the alert
tone. For as long as the temperature remains too high or too low, the temperature display keeps
ashing. As soon as the temperature falls between the thresholds, the temperature display
stops ashing.
Low battery capacity indicator:
When the batteries are nearly exhausted, the low battery capacity indicator appears. In this
case, please replace the batteries of the outdoor unit.
TO USE THE WEATHER STATION:
During normal use, the following data is
displayed:
clock
indoor and outdoor temperature
weather forecast animation
trend indicator
DCF time indication
any active alarms
Clock display:
Repeatedly press the “MODE/SET”(18) button for
the following display:
clock clock + day date + day year + day
Barometer trend indication:
The air pressure is higher compared to before
The air pressure remains the same as before
The air pressure is lower compared to before
Weather conditions:
When the weather animation shows rain, but one of the temperature displays is below 0°C, the
animation will indicate snow.
Frost alert:
The frost alert icon appears in the display when the outdoor temperature is between -2°C and
+3°C.
To manually search for the outdoor sensor:
Press and hold the “RF SEARCH”(15) button for at least 2 seconds until the value of the outdoor
sensor starts ashing. The weather station will now search again for the outdoor sensor.
To manually search for the DCF:
Press and hold the “AL-3 - 4 “ button for at least 2 seconds until the DCF time icon starts
ashing. The weather station will now to try again to receive the DCF signal again. Each day at
3:00 am the weather station automatically tries to synchronize with the DCF-77 station.
RESET / SYSTEM FAILURE
In case you’ve lost the overview of the settings or the weather station is exhibiting a possible
error, it may be wise to reset the weather station and outdoor sensor.
For more information, visit: www.fysic.com
D S T
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fysic FKW-2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fysic FKW-2200 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info