678950
5
Zoom out
Zoom in
Previous page
1/28
Next page
DAGELIJKSE SLUIMER EN WEKKER FUNCTIE:
Het weerstation heeft 4 wekfuncties. De wekker is geactiveerd als het wekkericoon met num-
mer verschijnt in het display. Tijdens de sluimerfunctie zal het wekkericoon knipperen. Iedere 5
minuten zal er een alarmsignaal klinken.
Wektijd instellen:
Druk op herhaaldelijk op toets “ALARM”(22) om de wektijd te selecteren.
Keuze uit wektijd 1 t/m 4. Iedere wektijd is apart in te stellen.
Ga naar de gewenste wektijd (icoon 1, 2, 3 of 4 en AL is zichtbaar).
Druk op toets “ALARM” en houdt deze voor 2 seconden ingedrukt totdat de
wekuren gaan knipperen. Met toetsen +(19) en -(21) kan het gewenste uur
worden gekozen.
Druk nogmaals op toets “ALARM”, de wekminuten gaan nu knipperen. Met toetsen +(19) en
-(21) kunnen de gewenste minuten worden gekozen.
Druk nogmaals op toets “ALARM” om de ingaven vast te leggen of wacht 10 seconden.
Selecteer met toets “AL 1-2”(19) de gewenste wektijd 1 en 2, en met toets “AL 3-4”(21) de
gewenste wektijd 3 en 4. Als het icoon in het display wordt getoond is deze wektijd actief.
Alle 4 de wektijden kunnen worden geselecteerd of combinatie hiervan.
Alarmsignaal uitzetten:
Als een actieve wektijd is bereikt, zal het weerstation een alarmsignaal geven.
Druk op een willekeurige toets (behalve de toets “SNOOZE”) om het alarmsignaal te stoppen.
Wordt er geen toets ingedrukt, dan stopt het alarmsignaal na ± 2 minuten automatisch.
Na 24 uur zal het alarmsignaal, in verband met de ingestelde wektijd, weer beginnen.
Sluimerfunctie:
Druk tijdens een alarm op de toets “SNOOZE”(16), het alarmsignaal zal stoppen en in sluimer-
modus komen. Het icoon knippert. Nadat de sluimermodus is in gezet, zal het alarmsignaal
na 5 minuten weer klinken. Dit herhaalt zich maximaal 7 keer.
Sluimerfunctie stoppen tijdens sluimeren:
Druk tijdens het sluimeren op de toets “ALERT”(17) om de sluimerfunctie te stoppen.
Het icoon verdwijnt.
THERMOMETER:
De temperatuur binnen wordt aan de linkerzijde van het display weergege-
ven. Mits de buitensensor is aangemeld wordt de temperatuur buiten aan de
rechterzijde weergegeven. Zie “handmatig instellen van het weerstation” om
de temperatuurinstelling weer te geven in °C of °F.
Als de gemeten temperatuurwaarde buiten het meetbare gebied valt geeft
het display de waarde LL.L voor te lage waarden en HH.H voor te hoge waarden.
Temperatuur alarm functie:
Alleen voor de buitentemperatuur kan een alarm worden ingesteld.
Er kan een temperatuur worden ingesteld zodra de buitentemperatuur hoger wordt dan ingestel-
de temperatuur klinkt een alarm, of als de buitentemperatuur lager wordt dan ingestelde tempe-
ratuur klinkt een alarm. Beide kunnen gelijktijdig actief zijn.
Instellen temperatuur alarm:
Druk op toets “ALERT”(17) voor de volgende selectie:
Hoog alarm actief (instelbaar van -49°C tot +70°C).
Hoog en laag alarm actief.
Laag alarm actief (instelbaar van -50°C tot +39°C).
geen alarm actief.
Druk op toets “ALERT”(17) en houdt deze minimaal 3 seconden ingedrukt totdat gaat knip-
peren. Stel met toetsen +(19) en -(21) de gewenste hoog alarm temperatuur in. Druk op toets
ALERT”(17), gaat knipperen. Stel met toetsen +(19) en -(21) de gewenste laag alarm tem-
peratuur in. Druk toets “ALERT”(17) om alles vast te leggen.
D S T
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fysic FKW-2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fysic FKW-2200 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info