678948
2
Zoom out
Zoom in
Previous page
1/2
Next page
DE:
Zu Anweisung 2.
Nach dem Anschließen der Stromversorgung kann es 1 bis 5 Minuten dauern, bis die Uhr das Funksignal für Uhrzeit und Datum empfängt.
Ursachen für keinen oder schlechten Empfang umfassen:
Andere drahtlose Geräte verursachen an der Uhr Interferenzen. Schalten Sie sie aus oder stellen sie wonaders auf, falls möglich.
Die Uhr steht neben Großgeräten aus Metall, wie zum Beispiel Kühlschränke.
Die Uhr steht hinter einer Trennwand aus Metall oder einer verstärkten Betonwand, die die Signalübertragung verhindert. Stellen Sie die
Uhr woanders auf.
Sie können die Taste für 3 Sekunden gedrückt halten, damit die Uhr weiter sucht.
Für Anweisungen, wie die Uhr manuell eingestellt wird, falls das Funksignal nicht oder nicht richtig empfangen wird, siehe Abbildung 10.
Zu Anweisung 3.
Laut Werkseinstellung ist die Uhr auf deutsche Sprache eingestellt (nur für Tag- und Monatsanzeige). Befolgen Sie diese Anweisungen, um
die gewünschte Sprache einzustellen. Die Uhr speichert Ihre Einstellung 15 Sekunden, nachdem die richtige Sprache angezeigt wird.
Zu Anweisung 8:
Als Backup bei Stromausfällen können Sie 3 AAA Batterien in die Uhr einlegen. Sie können wählen, ob Sie auadbare Batterien installieren,
diese werden jedoch NICHT aufgeladen. Hierfür verwenden Sie ein externes Ladegerät (nicht im Lieferumfang enthalten).
Um Batteriestrom zu sparen, wird die Helligkeit des Displays auf ein Minimum verringert, während die Backup-Stromversorgung genutzt wird.
Zu Anweisung 10:
Befolgen Sie diese Anweisungen, wenn Sie die Uhr manuell einstellen müssen, weil das Funksignal für Uhrzeit und Datum nicht empfangen
werden kann.
Hier können Sie auch die Dauer der Alarm-Weckzeit auf maximal 1 oder 2 Minuten einstellen.
‘DST’ im Display: (DST = Daylight Saving Time = Sommerzeit).
Diese Abkürzung erscheint im mittleren und oberen Teil des Displays, wenn die Uhr automatisch auf Sommerzeit umgeschaltet hat.
RESET-Taste:
Bei offensichtlicher Fehlfunktion oder wenn das Display der Uhr unnormal aussieht, müssen Sie möglicherweise die Uhr zurückstellen. Hierfür
verwenden Sie einen kleinen spitzen Gegenstand, um auf die kleine RESET-Taste auf der Rückseite zu drücken. Die Uhr wird neu gestartet
und sucht dabei erneut nach dem Funksignal für Uhrzeit und Datum.
GB:
At instruction 2.
After you’ve connected the power supply, it may take 1 to 5 minutes for the clock to receive the time and date radio signal.
Other wireless devices are causing interference in the clock. Switch them off or, if possible, move them.
The clock is positioned near large metal devices such as refrigerators.
The clock is positioned behind a metal bulkhead or a reinforced concrete wall impeding the signal transfer. Move the clock
to a different location.
You may press and hold the button for 3 seconds to have the clock search again.
See instruction 10 on how to manually set the clock in case the radio signal is not or not properly being received.
At instruction 3.
Upon leaving the factory, the clock is set to the German language (only for the display of the day and month). follow these instructions to set the
desired language. The clock will automatically save your setting 15 seconds after the correct language is being displayed.
At instruction 8:
As a backup in case of power outages you may insert 3 AAA type batteries into the clock. You may choose to install rechargeable batteries,
however they will NOT be recharged. To do so, use an external battery charger (not incl.).
To save battery power, the display intensity is decreased to the minimum level while backup power is being used.
At instruction 10:
Follow these instructions if you must manually set the clock because the radio signal for the time and date cannot be received.
Here you may also set the alarm wake-up duration to 1 minute maximum or 2 minutes maximum.
‘DST’ in the display: (DST = Daylight Saving Time).
This abbreviation appears in the middle and upper part of the display when the clock has automatically switched to daylight saving time.
RESET button:
In case of an apparent malfunction or when the clock display
appears abnormal, it may be necessary to reset the clock. To do
so, use a small sharp object to press the small RESET button at
the rear. The clock will then restart while again searching for the
time and date radio signal.
v1.0
Service
Help
Service Help
WWW.FYSIC.COM
SERVICE@FYSIC.NL
NL 073 6411 355
(Lokaal tarief)
BE 03 238 5666
(Lokaal tarief)
(Tarif local)
DE 0180 503 0085
Lokale Festnetzkosten
Hesdo, Australiëlaan 1
5232 BB, ‘s-Hertogenbosch
The Netherlands
WWW.FYSIC.COM
SERVICE@FYSIC.NL
NL 073 6411 355
BE 03 238 5666
DE 0180 503 0085
Hesdo, Australiëlaan 1, 5232 BB,
‘s-Hertogenbosch,
The Netherlands
(Lokaal tarief)
(Tarif local)
(Lokaal tarief)
(Lokale Festnetzkosten)
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fysic FK-777 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fysic FK-777 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fysic FK-777

Fysic FK-777 Quick start guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info