678960
15
Zoom out
Zoom in
Previous page
1/16
Next page
15
6. Press the “ ” button to start cleaning. The ultrasonic cleaner will now start the
cleaning process. The indicator remains lit during this process. The device will stop
cleaning after approx. 5 minutes. You may press the “ ”, button to stop the process
beforehand. The cleaning process will stop.
7. Make sure your hands are dry and remove the plug from the wall socket.
8. Open the lid.
9. Remove the cleaned object from the water reservoir.
10. Empty the water reservoir when not in use for a prolonged period of time or when
the water is heavily polluted.
INSTRUCTIONS
When filling with fresh tap water, based on the lime content, please keep in mind the
degassing time (optimal cleaning results are obtained using degassed water, e.g.
boiled, decalcified or distilled). In other cases we recommend you, for degassing the
water, to fill the device with water and have it operate for 3 cycles before inserting any
objects. When the water hasn’t been used for some time, it’s recommended to degas
the water again.
PROLONGED USE
Keep in mind that when used for a longer period of time (starting the cleaning process
multiple times in a row) the water and the reservoir may become warm. In this case,
please take a break to allow the water and the reservoir to cool down (we recommend
a 3 minutes pause in between cleaning processes). Using the device with the tank
being too warm may affect its life span and may loosen the vibration element.
MAINTENANCE
The FC-22 is maintenance free and thus requires no maintenance.
If necessary you may cleaning the exterior with a moist cloth; never use chemical
cleaning agents.
Don’t place the cleaner on surfaces treated with cellulose; the rubber feet may leave
tracks.
ATTENTION
Pay attention while cleaning glasses. An already loosened coating or colour layer on the
glass or frame may be further loosened when using the FC-22. When in doubt, don’t use
the FC-22 for glasses with coating.
Specications:
Ultrasonic Cleaner FC-22
Power Supply: 220-240V~ 50/60Hz
Power: 50W
Tank Capacity: 500ml
Timer: ± 5 mins
Dimension of Machine: 200×190×126mm
Net Weight: 720g
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fysic FC-22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fysic FC-22 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info