781739

Fuxtec FX-MH126 Manual

36
Zoom out
Zoom in
Previous page
1/102
Next page
Original Bedienungsanleitung FUXTEC FX-MH126_de_en_fr_ita_rev10
36
d. When refuelling, wipe off any spilled fuel thoroughly with a dry cloth.
e. After refuelling, tighten the fuel filler cap and move the equipment about 3 m from
the refuelling location before starting the Engine.
TRANSPORT
a. During transport, it is imperative that the enclosed protective cover or other suitable
protective coverings be used.
b. When transporting the equipment in vehicles, make sure that it cannot tip over
during transport.
c. If the ddevice is transported over long distances or in vehicles, the fuel tank must be
emptied beforehand to prevent fuel spillage during transport.
WORKING CONDITIONS
a. Wear suitable clothing and protective equipment when working with this equipment:
(1) Protective helmet (You must wear a helmet when working on sloping ground).
(2) Safety goggles or face protection
(3) Tight protective gloves
(4) Non-slip work shoes
(5) Hearing protection (especially for long-term work)
b. The following must also be carried:
(1) Combi-tool
(2) Fuel for refilling
(3) Spare cutting blade (if available)
(4) Ropes, warning signs, etc. For marking the working area
(5) Whistle (for communication with employees and for emergencies)
(6) Axe or saw (to remove obstacles)
c. Do not wear loose clothing, jewellery or short trousers and do not work in sandals or
barefoot.
BEFORE STARTING THE ENGINE
a. Check equipment for loose fastenings and leaking fuel. Check cutting tools for
proper mounting and tightness. In particular, the cutting edge and its connecting part
must be checked carefully.
b. The cutting edge can only be used if it is ensured that there are no cracks or bends
in the cutting edge. Damaged cutting edges must not be used under any circumstances.
c. Only use sharp cutting edges.
d. To avoid chipping of the cutting edges, grind the corners of the blade round.
e. After mounting the cutting edge and tightening the screw, check that it is properly
fastened. The blade is not permitted to have any play to avoid excessive vibration
throughout operation.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-MH126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-MH126 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info