781812

Fuxtec FX-E1B2AH - 20V Manual

5
Zoom out
Zoom in
Previous page
1/9
Next page
Follow all charging instructions and never charge the battery or battery tool outside the
temperature range specified in the operating instructions.
Incorrect charging or charging outside the approved temperature range can destroy the
battery and increase the risk of fire.
Charging the battery
- The battery must be charged before first use.
- Press the locking key (3) and remove the battery from the machine.
- Insert the battery pack in the charger.
- Connect the battery charger to the power supply. The charging status is indicated by the
control lamps (4).
- Insert the battery pack into the device and ensure that it clicks into place correctly.
Check the remaining capacity of the battery pack.
- Press the key (2). The remaining capacity of the battery is indicated by the control lamps(1).
DISPOSAL
WARNING!
Make used power tools unusable before disposal:
- mains-operated power tools by removing the connecting plug,
- battery operated power tools by removing the battery.
For EU countries only
Do not throw power tools in household waste! According to the European Directive 2012/19/EC
on waste electrical and electronic equipment and its implementation in national law, used
electrical equipment must be collected separately and sent for environmentally sound recycling.
Raw material recovery instead of waste disposal. Appliance, accessories and packaging should be
recycled in an environmentally friendly way. Plastic parts are marked for recycling
according to type.
WARNING!
Do not throw batteries in the household waste, fire or water. Do not open spent batteries.
Batteries should be collected, recycled or disposed of in an environmentally friendly way.
For EU countries only: According to Directive 2006/66/EC, defective or used batteries must be
recycled.
NOTE
Please contact your local authority/city for information on disposal options.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-E1B2AH - 20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-E1B2AH - 20V in the language / languages: English, German, French as an attachment in your email.

The manual is 0.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info