747922
183
Zoom out
Zoom in
Previous page
1/183
Next page
183
Data
FX-22/FX-30/T14SG/T12FG ĺFX-36 MODEL DATA CONVERSION
The model data (only latest version) of FX-22/FX-30/T14SG/T12FG can be copied to FX-36.
* SD card is required.
* The model data of FX-36 cannot be copied to FX-22/FX-
30/T14SG/T12FG.
* Functions in FX-22/FX-30/T14SG/T12FG, functions not
in FX-36 are not converted.
[Model data conversion method]
1. Attach an SD card that contains model data
of FX-22/FX-30/T14SG/T12FG to the SD slot of
a FX-36.
2. Turn on the power switch, and the Data
Converter should run.
3. The converter shows a list of model data in
the card. Select a model data that you want
to convert and push "CONVERT"
"Yes" key,
and the converter should begin converting
data.
4. If the convert succeeds, the converter will
show the following message. The converted
data are copied to the internal memory
of the FX-36. Hence, if the FX-36 does not
have available space in its internal memory,
converts must fail.
* When SD card cannot be recognized, it may be able to
be used if it reformats by SD formatter offered from SD
Association.
SD formatter is downloadable from SD Association
https://www.sdcard.org/ (As of June, 2017)
CAUTION
After ¿nishing data copy, be sure to perform a
complete check of operation with the model to
be used.
Check well all the directions of operation and
all the operation switches.
5. The converter can accept model data
made by FX-22/FX-30/T14SG/T12FG with the
latest software only. If you try to convert
model data made by old version software,
the converter must fail to convert and show
the following error message. If this message
is shown, do the following procedure to
update the model data in order to avoid
this limitation.
(a) First, update a FX-22/FX-30/T14SG/T12FG to the latest
software.
(b) Load the model data which failed to convert into the FX-
22/FX-30/T14SG/T12FG with the latest software, and the
model data should be updated to the latest format.
(c) Save the updated model data to a SD card.
(d) Retry to convert the updated model data on a FX-36.
FUTABA CORPORATION
Makuhari Techno-Garden Bldg. B-6F, 1-3 Nakase, Mihama-ku, Chiba, 261-8555, Japan
Phone: +81-43-296-8259, Facsimile: +81-43-296-8253
©FUTABA CORPORATION 2017, 10 (1)
Important: Always check the operation of
the model prior to Àight.
183


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FX36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FX36 in the language / languages: English as an attachment in your email.

The manual is 11,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba FX36

Futaba FX36 User Manual - German - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info