30092

Futaba FP8SGAP Manual

36
Zoom out
Zoom in
Previous page
1/38
Next page
•MUTUAL (BI-DIRECTIONAL)
MIXING (FLPRON, ELEVN, V-TAIL, DIFF)
Aileron + flap (FLPRON), aileron + elevator (ELEVN), rudder + elevator (V.TAIL), and aileron differential
(DIF) mixing can be selected with a switch.
FLPRON (AILERON + FLAP)
•This
function
allows
the
use
of
flaps
on
aircraft
with full length "strip" ailerons.
•
Use
a separate servo on each aileron and connect
as shown in Fig. 61 . NOTE: Always connect the
servo on the Right Aileron to CH1 (Aileron).
The Left servo to CH6 (Flap).
• Set Switches 16 and 17 as shown in Fig. 72.
• Aileron differential can be varied to suit using
Trimmer 15 . Trimmer 15 will vary the amount
of DOWN travel available on each aileron. UP
movement is not affected.
•The
Flap
function
can be operated by
using
the
Flap Knob 6 or better by using Switch 10 to
activate the Flaps and Elevator trim if necessary
(See Flap -> Elevator Down mixing Page 30).
• Elevator -> Flap mixing is possible by setting
trimmer panel Switch 10 to ACT and Control
Switch 12 to ON. (See Elevator -> Flap mixing
Page 30)
• Pitch trim in vertical maneuvers and point manu-
vers can be adjusted easily by using the Flap
Knob 6 .
• NOTE: When the ailerons are operated while in
the Flap DOWN mode, an additional downward
movement of the Aileron occurs. Wing tip stall
can occur easily if the Aileron is down too far.
To
prevent this, it may be necessary to use the
aileron differential (Trimmer 15) to reduce the
downward travel.
* Always connect the servo at the right wing to
receiver channel 1 (aileron).
Fig. 73
Fig. 72
Fig. 74
… 36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP8SGAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP8SGAP in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info