29021
2
Zoom out
Zoom in
Previous page
1/12
Next page
FEATURES OF NEW ATTACK NEW ATTACK-R AND NEW ATTACK-BFR
The NEW ATTACK, NEW ATTACK-R has a BEC function.
The NEW ATTACK-BFR has BEC & ASP functions.
•The
BEC (Battery Eliminator Circuitry)
system
is
a
high performance constant voltage
circuit (regulator). Since the running Nicd battery can also be used as the receiver servo
power supply, there is no troublesome wiring and the vehicle can be made lighter.
(Installed in NEW ATTACK, NEW ATTACK-R and NEW ATTACK-BFR.)
•The
ASP (Adjustable
Safety
Position)
system
prevents
loss
of
steering
control.
It
is
a
safety
system
which protects the
vehicle
against
loss
of control due
to
a
discharged
Nicd
by detecting a drop in the voltage of the shared power supply Nicd battery and auto-
matically
sets
the
throttle
servo
to the
drive
motor off position
preset
at the transmitter
then allows steering with the remaining power before steering control is lost. When the
voltage of the running Nicd battery recovers, ASP is automatically reset and the normal
running functions are recovered by turning on the transmitter power switch. (Installed
in NEW ATTACK-BPR)
World's first safety system that allows running of the vehicle up to the finish
line while using the capacity of the power supply to the fullest without a loss of
steering control even when the voltage of the running Nicd battery drops.
•Transmitter is Built-in servo reverse switches. (New ATTACK-R, NEW ATTACK-BFR)
TRANSMITTER FP-T2NBL/T2NBR/T2NBFR
SERVO FP-S128
SMALL, RUGGED, HIGH NEUTRAL SERVO
•ASP (Adjustable Safety Position) system allows safe
recovery without a loss of steering control. (T2NBFR
only)
•New swivel stick system that allows selection
of the
stick lever operating direction over a range of 10°.
•Racing specification short
aluminum stick lever makes
operation extremely easy.
•New
neutral
lever
allows setting of
the
neutral
position
of the throttle stick in two stages. Perfectly matched to
the throttle position of motor and engine cars. The stick
can be changed to a ratchet system by installing an
optional slider.
Servo
reverse
switches (steering
& throttle).
Since each servo can be switched between forward and
reverse from the outside of the transmitter, linkage
hookup is extremely easy. (T2NBR, T2NBFR)
Level meter shows the state of the battery at a
glance.
•Crystal
can be changed from the outside. (Except 72.I
75MHz)
Hook. Optional neck strap can be used.
RECEIVER FP-R102GF
•BEC (Battery Eliminator Circuitry) system allows
sharing of the running Nicd battery and eliminates the
need for a regulator and diode.
•High
performance 2 channel
receiver
with
ASP system
when used with the proper transmitter.
•Crystal socket uses a new type of highly reliable sub-
miniature pins. Reliability is increased and the crystal
can be changed from the outside.
•Skew type armature motor.
Movement of the trimmer by even one notch is tracked
by a skew type motor which displays a performance
near that of a coreless motor.
New indirect drive potentiometer improves
vibration
and shock resistance and neutral accuracy.
Futaba low-power custom 1C provides extremely
high
torque, narrow dead band, and superior tracking.
Fiberglass reinforced PBT (polybutylene terephthalate)
injection molded servo case is mechanically strong
and
invulnerable to glow fuel.
•Strong polyacetal resin ultra-precision servo gear fea-
tures smooth operation, positive neutral, and very little
backlash.
Fiberglass reinforced epoxy resin PC board with thru-
the-hole plating improves servo amp vibration and shock
resistance.
Three pin connector eliminates faulty contact and im-
proves reliability against vibration and shock. Housing
has a reverse insertion prevention mechanism.
•Special grommet simplifies mounting
of the servo and
has an excellent cushioning effect.
•Six special adjustable splined horns.
•High 48.7oz.jn (3.5kg-cm) maximum output torque
allows use in almost any model.
1
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba ATTACK_R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba ATTACK_R in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info