68306
2
Zoom out
Zoom in
Previous page
1/2
Next page
Turn the amplifier level to zero
Turn the volume of the head unit to ¾ and the bass and treble to zero
Adjust the level control until the desired maximum volume is achieved without distortion.
Failure to follow these steps may cause permanent damage to the audio system.
Recommended Amplifier Installation Kits
FUSION recommends the following Amplifier Installation Kit to be used with Reactor Amplifiers
RE-AM90010 Reactor Monoblock Amplifier AC- AK04 4 Gauge Installation Kit
RE-AM45020 Reactor 2 Channel Amplifier AC- AK08 8 Gauge Installation Kit
RE-AM90040 Reactor 4 Channel Amplifier AC- AK04 4 Gauge Installation Kit
Trouble Shooting
RECORD YOUR PURCHASE DETAILS HERE:
MODEL NUMBER __________________________ DATE OF PURCHASE__________________________
AFFIX RECEIPT HERE
WARNING! Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB may
cause permanent hearing loss! Please watch for emergency vehicles as warning signals may not be heard. USE COMMON SENSE!
PROBLEM POSSIBLE REASON SOLUTION
Amplifier not switching on.
Power LED
not ‘on
• No +12v to power wire • Check fuses and connections to battery
• No power to remote wire • Check remote on connections to head unit
• Fuse broken • Replace fuse with correct type and
amperage
Amplifier not working, but
status LED ‘on’
• Fuse on amplifier blown • Replace fuse with correct type and
amperage
• Amplifier too hot • Move amplifier to vented area
• Turn head unit down
• Speaker wires shorted • Check that there are no speaker wires shorted to
another wire or to the vehicle chassis
No sound
• RCA Signal • Check RCA connection to head unit
• Gain control not set up • Ensure you have set up the amplifier gain
level control
• Head Unit • Check head unit volume level
• Amplifier • Check all power, remote on and ground
connections
• Speakers • Check speakers for wire shorts
V 4.0
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fusion RE-AM90040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fusion RE-AM90040 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info