648605

Furuno WMB-3250 Wassp Manual

58
Zoom out
Zoom in
Previous page
1/62
Next page
Doc. P/N: WSP-009-004
Version: V1.3
Issue Date: August 2013
www.wassp.com
Page 58 of 62
Operator Manual
► Verify that the Transfer Task is receiving data on each activated port by checking that the
Activity light ashes green (not red). The Transfer Task can be found in the Windows Task
Bar. You can verify that the correct NMEA sentences are arriving on each port by selecting
‘Monitor’. This will print out the received NMEA onto the window for that particular port.
► Finally if the seaoor is not uniformly at you could see rapid changes in the sonar display
with each ping as the ship moves across the seaoor. As there is no heave or pitch
compensation on this display it will often move up and down and if the seaoor changes
angle it will also appear to roll a bit. If you are unsure, check that the seaoor remains at on
a at section of seaoor and remember that a vertical shift is expected if there is vessel roll,
pitch and/or heave.
7.10 The mode button animates as if pinging but nothing happens.
What is wrong?
Check your GPS is on. This can be validated by checking the network input screen or transfer
task diagnostic displays.
Increase the gain, and range. Can you see noise on the Sonar Display? If not, reset the power
to the Transceiver, and reset the PC and retry. If this problem persists and there are no error
messages, contact your dealer. If you are getting an error message or messages, look at the
relevant information for the error message in the section of the FAQ.
Ensure that the Transducer has not been disconnected from the BTxR, both the receiver cables
and the transmit cables need to be connected in order for the WASSP system to operate. If
problems persist after a full system shutdown and power up then contact your dealer.
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno WMB-3250 Wassp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno WMB-3250 Wassp in the language / languages: English as an attachment in your email.

The manual is 10,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info