522197
3
Zoom out
Zoom in
Previous page
1/12
Next page
1. GENERAL INFORMATION
The Accu-Steer LA11 unit is a hydraulic linear actuator designed
to interface an autopilot system with a mechanical steering sys-
tems such as wire, cable or chain drives. A hydraulic linear ac-
tuator consists of a hydraulic drive unit (containing a pump unit,
bypass valve and reservoir assembly), a steering cylinder and the
interconnecting hoses.
One end of the cylinder is xed and the other end is connected to
a tiller arm or the mechanical quadrant, which is connected to a
rudder shaft. With this connection to a tiller arm the linear move-
ment of the cylinder is changed to rotary movement, which turns
the rudder and steers the vessel.
During normal mechanical steering, the hydraulic steering cylinder
strokes to port and starboard as the vessel is steered manually.
The oil in both sides of the cylinder ows back and forth through
a normally open bypass valve located in the linear actuator drive
unit. The steering cylinder is connected to the drive assembly with
two hoses (port and starboard). When the autopilot is switched into
the operating mode, the bypass valve is electrically closed. The
autopilot then drives the reversing hydraulic pump which in turn
operates the steering cylinder. See section 3 of this manual for a
more in depth description.
When the autopilot is operating, the cylinder with be turning the
rudder. The mechanical steering will be back-driven during this
time. The vessel’s steering wheel will be turning as the autopilot
makes corrections.
The Accu-Steer HRP11 is the reversing pump unit used in the LA11
linear actuator. The output ow rate of the pumpset determines the
speed of the steering cylinder. The HRP11 pump outputs 1.0 cu
in/sec or 16.4 cc/sec.
The BA150 X 9 is a balanced steering cylinder, which means the
volume of oil on both sides of the cylinder is equal. The volume of
this steering cylinder is 13 cu in (215 cc) of oil.
p01
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno LA11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno LA11 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info