503766

Funai LT8-M40BB Manual

25
Zoom out
Zoom in
Previous page
1/28
Next page
26
EN
C.I. (Common Interface)
This unit is equipped with a C.I. slot. You can enjoy additional
services with this function, for example Pay TV. The access
restrictions menu will appear on the TV screen when a CI module
is installed.
1) Turn off the unit and unplug from an AC outlet.
2) Insert the CI module straight to the C.I. slot of this unit.
• Some CI modules may be a two-piece design consisting of a card
reader with the viewing card. When using this kind of card,
insert the card reader firmly into the C.I. slot on the unit first.
Then, insert the viewing card into the reader.
3) Plug this unit into an AC outlet and press
[Q (standby-on)] to turn on the unit.
4) Press [MENU] to display the menu.
5) Press [K / L] to select “Setup”, then press [OK].
6) Press [K / L] to select “Common Interface”, then press
[OK].
7) Follow the instructions on the TV screen.
Reset Default
You can restore all the settings to the default except the memorised
channels and parental settings.
1) Press [MENU] to display the menu.
2) Press [K / L] to select “Setup”, then press [OK].
3) Press [K / L] to select “Reset”, then press [OK].
• Confirm message box will appear.
4) Press [0 / 1] to select [OK].
• All the settings are restored to the default except the
memorised channels and parental settings.
5) Press [MENU] to exit.
Parental Setting
You can set the maturity rating, lock the channel, or set the
password.
1) Press [MENU] to display the menu.
2) Press [K / L] to select “Parental”, then press [OK].
3) Press [the Number buttons] to enter the 4-digit number.
• If you have not set up your password, enter 0000.
• After entering the password, “Parental” menu will appear.
“Channel Lock”
You can set particular channels to be invisible.
4) Press [K / L] to select “Channel Lock”, then press [OK].
• “Channel List” will appear.
5) Press [K / L] to select the channel you want to lock, then
press [OK].
• “ ”will appear on the right of the channel.
6) Press [MENU] to exit.
• When you select the locked channel, you need to enter the
password to watch.
If you want to unlock
4) Press [K / L] to select “Channel Lock”, then press [OK].
• “Channel List” will appear.
5) Press [K / L] to select the channel you want to unlock, then
press [OK].
• “ ”will disappear.
6) Press [MENU] to exit.
Note:
• In case of failure, you need to call your CI service
provider.
• Menu operations may vary depending on the viewing
card. Refer to the manual accompanying the viewing
card.
DTV
Note:
If you select “Reset”, all the settings (except the
memorised channels) are reset to the default.
DTV ATV
BACK
Picture
Sound
TV
Setup
Parental
PIN Code
Back
Parental
BACK
18
-----
-----
19
20
21
22
38
901
902
ETV
Euro CH
Drama Now!
WNS
BCT
Eurasia Station
Picture
Sound
TV
Setup
Parental
Digital
Digital
Digital
Digital
Digital
Digital
Analogue
Analogue
Channel Lock Set Select Back
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Funai LT8-M40BB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Funai LT8-M40BB in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info