287612

Fujifilm finepix f410 zoom Manual

8
Zoom out
Zoom in
Previous page
1/69
Next page
DC IN 5V socket
14 15
1
CHARGING THE BATTERY
Check that the camera is switched off. Plug the
AC power adapter connector into the DC IN 5V
socket on the camera and then plug the adapter
itself into the main power outlet.
The self timer lamp lights
(
blue
)
and battery
charging begins. When charging is completed,
the self-timer lamp switches off.
A fully discharged battery takes roughly 3 hours
to fully recharge
(
at an ambient temperature of
+
21°C to
+
25°C
(+
70°F to
+
77°F
))
.
Use the AC power adapter to avoid losing power
at inconvenient times, such as when you are
downloading photographed images to your
computer. Using the AC power adapter also
allows you to take pictures and play back images
without worrying about depleting the battery.
hCompatible AC power adapters
AC
-
5VW/AC
-
5VS/AC
-
5VHS/AC
-
5VH
●
!
Use only the FUJIFILM products listed above.
●
!
See P.115 for notes on using the AC power adapter.
●
!
Only connect or disconnect the AC power adapter when
the camera is switched off.
Connecting or disconnecting the AC power adapter while
the camera is switched on temporarily interrupts the
power supply to the camera, so that images or movies
being shot at the time are not recorded. Failing to switch
the camera off first can also result in damage to the xD
-
Picture Card or malfunctions during PC connection.
●
!
Charging times increase at low temperatures.
●
!
If the self
-
timer lamp blinks during charging, a charging
error has occurred and the battery cannot be charged. If
this occurs, see P.122.
●
!
Switching the camera on during charging interrupts the
charging.
●
!
You can charge the battery more quickly by using the
BC
-
65 Battery Charger
(
sold separately
)(
➡P.110
)
.
●
!
The shape of the plug and socket
-
outlet depends on the
country of use.
Using the AC Power Adapter
SWITCHING ON AND OFF SETTING THE DATE AND TIME
1 2
When you first switch the camera on, the date is
cleared. Press the “MENU/OK” button to set the
date and time.
Slide the POWER switch to turn the camera on and
off. When you switch the camera on, the viewfinder
lamp lights
(
green
)
.
●
!
To set the date and time later, press the
“
BACK
”
button.
●
!
If you do not set the date and time, this confirmation
screen will appear each time you switch the camera on.
●
!
When you switch the camera on, the self timer lamp
lights for about 5 seconds.
●
!
If you load the battery while the camera’s POWER switch
is set to ON, the viewfinder lamp/self timer lamp lights
briefly. This is normal and does not indicate a fault.
If the “
q
/
T
” mode is selected, the lens cover opens
and the lens slides out. Avoid pressing on the lens
so as not to damage precision components.
Obstructing the lens will cause a malfunction or fault
and the “
ß
” or “
´
” message
will appear. Take care also not to get fingerprints on
the camera lens as this will result in impaired image
quality in your shots.
OFFON
Continued on next page...
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujifilm finepix f410 zoom at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm finepix f410 zoom in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info