Manual Fujifilm Finepix 2600 (page 7 of 47) (English)

101066

Zoom out

Zoom in

1/47

CHARGING AND LOADING THE BATTERIES

Load the rechargeable batteries into the battery

charger as indicated on the label.

●

Ni-MH batteries are not fully charged at shipment

and must be charged before being used. Newly

purchased batteries or batteries that have been left

unused for an extended period may not be fully

charged (This is indicated by the immediate display

of the battery low warning or a low number of

available shots). This is a normal characteristic of

the batteries and does not indicate a fault.

Repeatedly charging and using the batteries 3 or 4

times will restore them to a normal condition.

●

If the terminals of nickel-metal hydride batteries are

soiled, it may not be possible to charge them. To

avoid possible problems, clean the battery terminals

and charger terminals with a clean, dry cloth. (Clean

the battery and charger terminals with a clean, dry

cloth the first time the batteries are charged. Then

insert and remove the batteries from the charger

several times prior to charging.)

Use 2 nickel-metal hydride (Ni-MH) batteries of

the same type.

✽Lithium, manganese or nickel-cadmium (Ni-Cd) batteries

cannot be used.

hAA-size Ni-MH batteries

Fujifilm HR-3UF: 2 (supplied with the camera or

sold separately)

Attempting to charge batteries other than those

specified for use with the charger (such as

manganese, alkaline or lithium batteries) can

cause the batteries to burst or leak. This could

result in a fire or injury and consequent damage

to the surroundings.

✽ See P.87 for information on the number of

available shots using batteries.

◆

Batteries that Can Be Charged

◆

●

Alkaline batteries should only be used in an

emergency. Note the following when using alkaline

batteries:

iThe battery terminals should be wiped clean with a

clean, dry cloth.

iAlways switch the LCD monitor off (➡P.22) before

using alkaline batteries. Alkaline batteries cannot be

used in Manual mode, Macro mode or Movie mode.

iThe number of available shots is limited and varies

depending on the battery brand and ambient

temperature. You may be unable to take pictures at

all at temperatures of +5°C (+41°F) or below.

iIf the the LCD monitor is switched off, the camera

switches off without first displaying a battery low

warning when the battery charge runs out.

●

Install the equipment near a socket outlet for easy

accessibility.

●

Do not apply excessive force to the battery cover.

●

If you connect the optional AC power adapter or leave

the batteries in the camera for roughly 10 minutes, the

settings will be retained for approximately 12 hours

even if you disconnect the AC power adapter or

remove the batteries. After replacing the batteries,

check the date/time settings, etc.

Plug the charger into a power outlet to begin charging.

Charging ends after about 5 hours and the charging

lamp goes off. Unplug the battery charger from the

power outlet when it is not in use.

Slide the battery cover out to open it.

Charge lamp

2 3

●

Fully discharged Ni-MH batteries take approximately

5 hours (1700 mAh) to recharge. Shorter charging

times can be achieved using the Ni-MH/Battery

Charger BCH-NH (➡P.71).

●

If you repeatedly charge a Ni-MH batteries before it

is fully discharged, it will suffer from the “memory

effect”

✽

, causing the battery low warning to appear

while there is still ample charge remaining in the

batteries. You can restore the batteries to normal

operation by running the batteries completely flat

before charging them.

✽ Memory effect: A phenomenon whereby the batteries

properties are such that its capacity is lower

than the nominal amount.

●

Do not use old and new batteries together.

✽ The shapes of the Battry charger, the plug and socket outlet

depend on the country.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fujifilm Finepix 2600 in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fujifilm Finepix 2600 Manual

Product: