535711
3
Zoom out
Zoom in
Previous page
1/78
Next page
3
physical protection such as security window and
door locks.
All units in the system are encoded to operate
together using an 20 bit rolling House Code.
The system House Code is automatically
changed each time the system is
armed/disarmed or triggered by a detector.
The system can be operated from one or more
accessory Remote Control Units and/or
Keypads. It can also be operated remotely over
the internet using a PC or mobile
device(Android/Apple IOS device). Care should
be taken to ensure that any of your Remote
Control Units are not lost or the User Access
PIN Code for the Control Panel do not become
known to other people as this will compromise
the security of your system. The User Access
PIN Code should be changed as soon as
possible.
HOME AUTOMATION CONTROL
The system allows you to create Programmes,
Schedules and Events using the GlobalGuard
PC setup software. Home automation allows you
to control wireless ON/OFF switching devices
together with security arming. There are 3
function keys I/II/III located on the side of the
Control Panel which are programmable via the
PC software and each function key can store a
Programme. The activation of a Programme can
be instantly activated simply by pressing one of
the corresponding function keys.
REMOTE ACCESS AND SYSTEM
REQUIREMENTS
This system is supplied pre-linked to an IP
gateway module which allows you to remotely
access and control your system via the internet.
In order to get the full benefits of the system,
please ensure you meet the following
requirements:
A broadband router with x2 spare LAN ports
(x1 for IP gateway and other for an optional IP
Camera if added in future)
- An unrestricted internet broadband
connection with wired or wireless (Wifi)
connectivity. (For optional wireless
indoor CCTV accessory, Wifi will allow
you connect the camera to the router
wirelessly)
- A PC with;
Operating System:
Windows XP/Vista/Window7
Internet Explorer 6.x or higher Internet
Web Browser
CPU: Pentium 4, 1GHz or above
VGA Card Resolution: 800x600 or
above
Video Memory Size: 128Mb or above
Recommended internet upload speed
512kbp/s for 1 x IP Camera (optional)
or 2Mbp/s for 8 x cameras connected
Optional Android or Apple IOS
Smartphone/mobile device;
IOS: iPhone1/2/3/4, iPad1/2, iPod
Touch 4 up to IOS V4.3. 4(latest iOS
Version release)
Android: Android phone V2.X, tablet PC
tested up to V4.0
PROGRAMMING THE SYSTEM
The system can be setup using the instructions
in this manual or alternatively using the
GlobalGuard PC setup software available at
www.GlobalGuard.Friedland.co.uk
Note that home automation Programmes,
Events and Schedules can only programmed
using the PC software. This means that the
function keys I/II/III located on the side of the
Control Panel can only be programmed from the
PC software.
If using a PC to run the setup software then
ensure that it is connected wired or
wirelessly (WIFI) to the same internet
broadband router as that connected to the IP
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Friedland HISK1 GlobalGuard Alarm System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Friedland HISK1 GlobalGuard Alarm System in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info