686544
13
Zoom out
Zoom in
Previous page
1/14
Next page
Frama F-Link
24
F008
F-Link Status: F008
F-Link updates the firmware!
DO NOT SWITCH OFF F-Link!
Wait until READY LED is
switched on again and retry!
F-Link updates its firmware instead of processing your
operation (inspection, credit loading). After the complete
download of the firmware from the FO2 backend server
the installation of the firmware is running and this mes-
sage is displayed on the franking system.
Do not switch of the F-Link is this state. F-Link reboots
automatically to startup with the new firmware. Wait until
the Ready LED is light up stable again. Then please repeat
your operation.
F-Link checks for a firmware upgrade on each call to the
FO2 backend server.
F009
No answer from DHCP server
Change F-Link DHCP settings
on {ipaddress}
Please refer to manual for
further information.
F-Link is configured to get a dynamically IP address from a
DHCP server in your network. But F-Link gets no dynami-
cally IP address from a DHCP server.
Please configure the F-Link network settings properly. To
set the configuration you may access the F-Link configura-
tion pages over the displayed IP address.
Please check the operation of the DHCP server in your
network.
F010
Proxy error.
Change F-Link Proxy settings
on {ipaddress}
or update Proxy Server.
Refer to manual for further info.
The request of F-link is responded with a HTTP error code
(more codes are possible) of local proxy server. The HTTP
error code can be found in the event log of F-Link.
Please configure the F-Link proxy settings properly. To set
the configuration you may access the F-Link configuration
pages over the displayed IP address.
Possible cause for HTTP error code 305 Use Proxy: The
internet is only accessible over the local proxy server.
Possible cause for HTTP error code 407 Proxy Authentica-
tion Required: The username and password for access to
the local proxy server is wrong.
Possible cause for HTTP error code 502 Bad Gateway:
The proxy server cannot communicate with the FO2
backend server.
F011
F-Link Status: F011
Currently no WAN (internet).
Check local DNS, local firewall
and local Proxy-Server.
Refer to manual for further info.
F-Link is connected to the network and has got a valid IP
address in the network. F-Link had access to the internet
and to the FO2 backend server in the past. Currently, F-
Link has no access to the internet and to the FO2 backend
server.
Please check your internet access with another device in
the same network and try again.
Frama F-Link
25
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Frama F-Link at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Frama F-Link in the language / languages: English as an attachment in your email.

The manual is 2,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info