628397
34
Zoom out
Zoom in
Previous page
1/35
Next page
34
/
35
The DVR will ask the user to enter his User ID and
Password.
Please select the best image resolution for the mobile
phone or PDA than press “OK”.
Now it will be possible to view the image on the mobile
phone or PDA, manage the output relays and know the
state of the input alarm directly by the interface.
7.4 PTZ Camera connection:
The DVR can be used for manage until 4-9-16 PTZ cameras using the RS-485 cable. (Fig D:)
Please follow the steps below to connect a PTZ camera to the DVR:
Instructions Picture
Please follow the instruction manual of the Camera to configure it with Pelco-D Protocol, Baud Rate of 4800 bps and a ID
Address (from 1 to 255) that will be different for each camera.
Connect the BUS RS-485 of the camera to the back
panel of the DVR.
Press “MENU”, than SETUP and “RS-232/422/485
Setup” on the DVR for enter to the BUS configuration
and enter the same Protocol (Model) and Baud Rate of
the PTZ camera.
RS
-
232/ 422 /485 Setup
COM Port
RS
-
232
RS
-
422/485
Device Type
PTZ
Model
Pelco (D
-
Type)
Baud Rate
4800
Data Bit
8
Stop Bit
1
Parity
None
DVR/Camera ID
0
Press “MENU”, than “SETUP and “Pre-Camera
Setup” on the DVR and enter the ID Address of the
Pre
-
Camera Setup
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fracarro Venezia 8 DVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fracarro Venezia 8 DVR in the language / languages: English, Italian as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info