768964

Foppapedretti Hey Manual

9
Zoom out
Zoom in
Previous page
1/12
Next page
HEY 9
GB
To install the rear wheels (g.1)
Insert the rear wheel pack into the rear frame as shown in gure. The wheel pack with the brake pedal should be
positioned on the right side.
A “click” will indicate the correct assembly. The wheels should not unhook when pulling them downwards.
To open the stroller (g.2-3)
Pull the release levers “A” upwards. A snap (“click”) will indicate the release.
Lift the handles and push with the foot on the pedal until a “clack” indicates the complete opening and correct lock
of the chassis.
To adjust the backrest (g.4)
The backrest is adjustable in 3 positions. Press the button and raise or press down the backrest to wanted position.
To adjust the legrest (g.5)
Press the release buttons positioned on the lower part of the legrest on both sides and contemporaneously adjust the
legrest to wanted position.
To adjust the canopy (g.6)
Pull out or push in the canopy to open or close it.
Window (g.7)
Pull back the curtain of the window on the canopy to easier supervise the child while sitting in the stroller.
To use the safety belt (g.8-9-10)
Fasten: Insert the tabs “a” into the buckle “b” as shown in gure. A “click” will indicate the correct fastening.
Release: Press button “c” and pull out the straps from the buckle “a”.
Important:
The safety belt has to be used always and only correctly fasten, including all components, as shown in g.11.
To activate and lock swivel wheels (g.12)
Fix front wheels: Press the lock levers downwards and push the stroller slightly forwards to x the front wheels.
Activate swivel movement: Pull the lock levers upwards on both front wheels.
To brake and unbrake the stroller (g.13)
Press the pedal to activate the parking brake.
Push the stroller slightly forwards for complete block.
Lift the pedal to unbrake the stroller.
ATTENTION: Always activate the parking brake when the stroller is still and not in use.
To fold the stroller (g.14-15-16)
Close the canopy.
Pull the backrest in upright position.
Fix the front wheels.
Pull up the secure handle “A”, a “clack” will indicate that the stroller is unlocked.
Pull the release levers “B” on both sides upwards, a “click” will indicate unlock.
Fold the stroller as shown in gure, by pushing the handles downwards in direction of the front wheels. A “click” will
indicate the correct closure.
To remove and install the canopy (g.17-18)
Remove: Pull slightly lever “A” positioned on the front of the pivot point and slide the articulation part of the canopy
downwards to remove it. Repeat the same operation on both sides.
Install: Insert the articulation part in its seat, slide it upwards and push slightly lever “A”. A “click” will indicate the
correct assembly. Repeat the same operation on both sides.
Remove the seat fabric (g.19-20-21-22)
Unscrew all screws.
Unhook the metal hooks.
Release the press snap buttons on both sides.
Take off the cover from the seat.
Repeat this operation backwards to put the cover back on the seat.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Foppapedretti Hey at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Foppapedretti Hey in the language / languages: English, Italian as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info