631046
5
Zoom out
Zoom in
Previous page
1/8
Next page
4
Cutting Height Adjustment
Height of cut is adjusted by raising or lower-
ing the wheels.
NOTE
All 4 wheels must be adjusted to the same
position:
HEIGHT OF CUT
WHEELS
Low Hole 1
Medium Hole 2
High Hole 3
NOTE
A medium height of cut is recommended for
most lawns.
1. To remove the wheel assembly turn the wheel
hub in an anti-clockwise direction.(E)
2. Select one of the 3 holes in the mounting plate
and note it as the other 3 wheels will need to be
adjusted to the same position.(F)
3. Locate fixing bolt through hole in hub cap, wheel
and selected hole in mounting plate.(F)
4. Turn the wheel hub in a clockwise direction until
the wheel assembly is securely located to the
deck.(E)
5. Using the same height adjustment position
repeat the procedure for the other 3 wheels.
1
2
3
F
mounting
plate
holes
wheel
hub cap
fixing bolt
to remove
turn anti-clockwise
to fit
turn clockwise
E
Grassbox
Fitting Fully Assembled Grassbox to
Lawnmower. See Fig G.
1. Lift safety flap.
2. Make sure the discharge chute is clean and free
from debris.
3. Locate fully assembled grassbox onto 2 location
points at the rear of the deck
4. Locate safety flap onto the top of the grassbox.
Ensure the grassbox is securely located.
IMPORTANT !
AFTER FITTING ENSURE NO GAP REMAINS
BETWEEN THE SAFETY FLAP AND THE
GRASSBOX.
Removal is the reverse procedure.
For larger areas of grass where grass collection
is not required you can use your lawnmower
without the grassbox. Ensure the Safety Flap is
fully closed. The design of the safety flap per-
mits the cut grass to be discharged downward
behind the machine.
G
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flymo RE32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flymo RE32 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info