Storing your Lawnmower
• Warning
:- This product is heavy, use
extra care when lifting.
• Warning
:- Be careful when folding handles
to prevent entrapment of fingers.
• Before storage, ensure that the front
height of cut is at its lowest (V1). Failure to
ensure this will prevent the product from
fitting into the grassbox (V2).
1. Remove the Grassbox and place in front
of the product (V3).
2. Push the product halfway into the Grassbox,
3. Unlock the Cam Locks on the Lower Handle
(W1) and fold the Handles forward over the
product (W2).
4. Push the product further into the Grassbox
(W3) until the top of the Lower Handle locates
under the Grassbox Hook (W4).
5. Lock the Cam Locks on the Lower Handle
6. Unlock the Cam Locks on the Upper Handle (X1) and
fold it over to meet the Lower Handle (X2). Leave the
Cam Locks unlocked.
7. Wrap the cable around the Handle using the hook on the
Cable Hooks (Y2) and the Grassbox (Y1).
8. Store your product in a cool, dry place where it is pro-
tected from damage
Transporting your Lawnmower
Your product can be transported by unfolding the Upper
Handle from its storage position, locking the Cam Locks
and pulling it along on its roller (Z1)
V3
W
X
Y Z
Storing and Transporting your Lawnmower
V1
V2
2
3
4
1
1
2
1
2
1
Fault Finding Hints
Fails to Operate
1. Is the correct Starting procedure being followed? See ʻTo
Start your Lawnmowerʼ
2. Is the Power Turned On?
3. Check the fuse in the plug, if blown replace.
4. Fuse continues to blow?
Immediately disconnect from the mains electricity supply
and consult your local approved Service Centre.
Poor Grass Collection
1. Disconnect from the mains electricity supply.
2. Clean the outside of the air intakes, the discharge chute
and the underside of the deck.
3. Raise to a higher height of cut. See Cutting Height Adjustment.
4. Clean Fan Blades.
5. If poor collection persists.
Immediately disconnect from the mains electricity supply
and consult your local approved Service Centre.
Excessive Vibration
1. Disconnect from the mains electricity supply.
2. Check that the Blade is fitted correctly?
3. If the blade is damaged or worn, replace it with a new one.
4. If vibration persists, turn the Blade through 180
o
by first loosening the
Blade Bolt, turning the Blade and re-tightening the Blade Bolt.
5. If vibration persists?
Immediately disconnect from the mains electricity supply
and consult your local approved Service Centre.
Lawnmower becomes heavy to push
1. Disconnect from the mains electricity supply.
2. In long grass or uneven ground, the height of cut should be
raised to a higher position. See Cutting Height Adjustment.
3. Check that the wheels can rotate freely.
4. If problem persists?
Immediately disconnect from the mains electricity supply
and consult your local approved Service Centre.
Service Recommendations
• Your product is uniquely identified by a silver and black
product rating label.
• We strongly recommend that your product is serviced at least
every twelve months, more often in a professional application.
