631024
7
Zoom out
Zoom in
Previous page
1/9
Next page
T1
T2
Cleaning the Easi-Reel cable winder
1. At the back of the cable winder, squeeze together the
two catches (T1) and remove the cable spool.
2. Clean the cable spool and the area it was located with
a soft brush (T2 & T3)
3. Replace the cable spool, ensuring it clicks into place.
Transporting the lawnmower.
The lawnmower may be transported on its roller (V).
At the End of the Mowing Season
1. Replace blade, bolts, nuts or screws, if necessary.
2. Clean your lawnmower thoroughly.
3. Ask your local Service Centre to clean the air filter thoroughly
and carry out any service or repairs required.
4. Make sure that the electric cable is coiled properly.
Storing the lawnmower
The handles can be folded to take up the minimum of
space
1. Hold onto the lower handle with your left hand as illus-
trated in fig. W.
2. Hold the upper handle with your right hand and push
in the direction of the arrow.
3. Move the handle slowly forward to rest it on the lawn-
mower (X). Do not drop the handle.
Ensure the switchbox cable is not trapped.
Do not hang the product on the wall as this will dam-
age the switchbox.
Store in a dry place where your lawnmower is pro-
tected from damage.
Fails to Operate
1. Is the correct Starting procedure being followed?
See ʻTo Start your Lawnmowerʼ
2. Is the Power Turned On?
3. Check the fuse in the plug, if blown replace.
4. Fuse continues to blow?
Immediately disconnect from the mains electricity
supply and consult your local approved Service
Centre.
Poor Flotation
1. Disconnect from the mains electricity supply.
2. Clean the underside of the hood and the fan blades.
3. Raise to a higher height of cut. See ʻAdjusting the
Cutting Heightʼ.
4. If poor flotation persists?
Disconnect from the mains electricity supply and
consult your local approved Service Centre.
Poor Collection
1. Is the grassbox lid firmly closed?
2. Is the grassbox fitted correctly?
3. Are you mowing correctly?
4. Check all air vents and openings are not obstructed.
5. Raise to a higher height of cut. See ʻAdjusting the
Cutting Heightʼ.
6. If poor collection persists.
Disconnect from the mains electricity supply and
consult your local approved Service Centre.
Excessive Vibration
1. Disconnect from the mains electricity supply.
2. Check that the blade is fitted correctly?
3. If the blade is damaged or worn, replace it with a new one.
4. If vibration persists?
Disconnect from the mains electricity supply and
consult your local approved Service Centre.
Fault Finding Hints
V
X
T3
W
7


Need help? Post your question in this forum.

Forumrules
1

Forum

flymo-glide-master-360

Reset search

  • I cannot seem to be able to use or get off the easy reel on top Submitted on 17-10-2018 at 21:26

    Reply Report abuse
  • The blade seems to have dropped - I hit a tree stump. Blade fine but since then the blades appears to have dropped lower therefore cutting into the lawn / dirt Submitted on 13-5-2018 at 11:34

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flymo Glide Master 360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flymo Glide Master 360 in the language / languages: English as an attachment in your email.

The manual is 4,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info