Manual Flymo 1200R - 2013 (page 2 of 2) (English)

631059

Zoom out

Zoom in

1/2

2. Charging the battery and

placement of the boundary wire

See chapter 3.3 and 3.4 in the Installation Manual

1. Place the robotic lawnmower in the charging station

to charge the battery while the boundary wire is laid.

Set the main switch to position 1.

2. Run the boundary wire ensuring it forms a loop

around the work area.

3. Make an eyelet at the point where the guide wire

will be connected later (see point 4.5).

20 cm / 8”

10 cm / 8”

0 cm / 0”

5 cm / 2”

30 cm / 12”

1. Placement of and connecting the

charging station

See chapter 3.2 in the Installation Manual

1. Place the charging station at a central position in the work area, with

a lot of open space in front of the charging station and on a relatively

horizontal surface.

2. Connect the transformer’s low voltage cable to the charging station

and the transformer.

3. Connect the transformer to a 230 V wall socket.

1. Main switch

2. STOP button

3. LED for function check of the

boundary and guide wires

4. Cutting height indication

5. Display

6. Keypad

Charging station

12345

1 2 3

4 5 6

7 8

Start

GETTING STARTED WITH THE FLYMO

min 2 m / 7 ft

4. Placement of and connecting the

guide wire

See chapter 3.6 in the Installation Manual

1. Run the guide wire through the slot at the bottom of the charging

station.

2. Fit the connector to the guide wire in the same way as for the

boundary wire, according to the instructions above.

3. Fasten the connector to the contact pin marked Guide on the

charging station.

4. Lay the guide wire at least 2 metres straight out from the front edge

of the charging station.

5. Run the guide wire to the point on the boundary loop the connection

will be made. Avoid laying the wire at tight angles.

6. Cut the boundary wire with a wire cutters at the centre of the eyelet

that was made in point 2.3.

7. Connect the guide wire to the boundary wire using the

accompanying couplers. Press the couplers completely together

with a pair of pliers.

1 2

3. Connecting the boundary wire

See chapter 3.5 in the Installation Manual

1. Open the connector and lay the wire ends in the recesses on

each connector.

2. Press the connectors together using a pair of pliers.

3. Cut off any surplus boundary wire. Cut 1 to 2 cm above

the connectors.

4. Press the connectors onto the contact pins, marked A, on

the charging station. It is important that the right-hand wire

is connected to the right-hand contact pin, and the left-hand

wire to the left-hand pin.

Transformer Low voltage cable Boundary wire

and couplers

Pegs Connectors Measurement

gauge

1200 R ROBOTIC LAWNMOWER

5cm

0cm

20cm

30cm

30 cm / 12”

I have had a lot of trouble with my 1200R this year. I now have a flashing green light and it isn’t charging. I think it might need a new battery but I thought I would ask the question before changing the battery. My emails to Flymo go unanswered!!! Irene Submitted on 2-6-2022 at 19:43
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Flymo 1200R - 2013 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Flymo 1200R - 2013

Flymo 1200R - 2013 Installation Guide - English - 70 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Flymo 1200R - 2013 Manual

Product: