542112
63
Zoom out
Zoom in
Previous page
1/66
Next page
63
Problem: The console / display will not turn on.
Solution: - Check if the treadmill is pugged into a grounded outlet.
- Check if the 0 / I switch is on (I). The switch is near the power cord on the
near the motor cover.
- Check the fuse near the switch. If the fuse is broken, please contact your
dealer.
Problem: Segments of the display don’t light up.
Solution: LEDs of the display are damaged; please contact your dealer.
Problem: display shows “- - “.
Solution: The safety key is missing. Place the key into the designated place to use the
treadmill.
Problem: The treadmill is running rough.
Solution: There is not enough lubricant between the belt and the running surface.
The treadmill should be lubricated at regular intervals.
Problem: The running belt slips on the rollers.
Solution: The belt needs to be tensioned. How to tensioning the belt is described in
chapter 4.2.
Problem: When touching metal parts of the treadmill static electricity is released.
Solution: - The treadmill should be powered by an grounded outlet.
- The running surface needs to be lubricated. Friction is created between the
belt and running board. This causes static energy and can be prevented by
regular lubrication.
Problem: The display shows error code E1.
Solution: An abnormal value is send to speed sensor. Perform the following steps:
1. Remove power from the treadmill (by unplugging the product from the
outlet), wait 10 seconds before turning on the power again.
2. Press START/STOP and check the following:
a. Does the belt starts to move?
b. If the belt is moving, is the error code E1 still in the display?
3. If the treadmill is running correctly, tension the belt again and lubricate the
running surface (chapter 4.4 of this manual)
If the belt is not running or error code E1 is still visible, please contact your
reseller.
5.3 Troubleshooting
5. General information
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flow Fitness RUNNER DTM900 loopband at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flow Fitness RUNNER DTM900 loopband in the language / languages: English, Dutch as an attachment in your email.

The manual is 6,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info