674625

Florabest FLS 3000 B2 - IAN 285190 Manual

32
Zoom out
Zoom in
Previous page
1/136
Next page
32
GB IE
ing if desired. The shredding
intensity depends on the size
of the leaf material and its
residual moisture.
Uses other than those described
here may damage the machine
and put the operator at risk.
During work, ensure that the device
is not struck against hard objects,
which can cause damage. Do
not suck up any solid bodies such
as stones, branches or pieces of
branch, r cones or similar, since
these can damage the device, in
particular the shredding mechanism.
Repairs of this type are not
covered by the guarantee.
Blowing operating mode:
For safety reasons, make
sure that the protective cover
(
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
7) is mounted on the suc-
tion opening.
• You get optimal results when you use
the blower with a separation distance
to the ground of 5 -10 cm.
• Begin work with the highest blowing
power, in order to rapidly pile up the
leaves lying around. Select a lower
blowing power to compact the previ-
ously piled up leaves.
• Before blowing, loosen leaves adhering
to the ground with a broom or rake.
• The guide rollers at the end of the tube
make it easier to work on at surfaces.
Suction operating mode:
For safety reasons, both suc-
tion tube sections and the
collection bag must be cor-
rectly mounted before you
can start the device.
• Always hold the device tight with both
hands during operation: use the handle
(
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
3) and the additional
handle (
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
10) for this.
• Make sure the volumes of leaf material
sucked in at one time are not too large.
This will avoid clogging of the suction
tube (
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
16) and blockage of the impel-
ler wheel.
To reduce wear on the collection
bag, do not drag it along the
ground while working.
Overload protection: The motor
will cut out immediately if overloaded.
Turn the leaf vacuum off and remo-
ve the mains plug. Then check whe-
ther the impeller is blocked or the
collection bag clogged and remove
the obstacles if they are.
The tool cannot be used until it has
completely cooled down again.
Emptying the collection bag:
With full collection bag, the suction pump-
ing capacity decreases considerably and
the collection bag must be emptied when
the bag is full or interferes with the suction
capacity of the device.
1. Turn off the device and wait until
the impeller has stopped.
2. Unplug the device.
K L M N O P Q R S T
U V W X Y Z
A B
C D E F G H I J
3. Remove the attachment eyes (15)
from the holding points (19).
Release the collection bag by
pressing the locking button (8).
4. Open the zip-fastener on the collec-
tion bag and empty it completely.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FLS 3000 B2 - IAN 285190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FLS 3000 B2 - IAN 285190 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info