733441
7
Zoom out
Zoom in
Previous page
1/74
Next page
FHEHS 900 B2
GB
IE
NI 3
Package contents
1 motor unit FHEHS 900 B2
1 hedge trimmer attachment FHS 2 (hereinafter hedge trimmer)
1 pole pruner attachment FHE 2 (hereinafter pole pruner)
Accessories
1
shoulder strap
1
chain guard
1
blade guard
1
100 ml organic chain oil
1
assembly tool
1 set of operating instructions
Technical data
Motor unit: FHEHS 900 B2
Rated voltage: 230 V ∼ 50 Hz (AC)
Rated output: 900W
Protection class: II /
(double insulation)
Weight:
(without handle &
carrying strap): approx. 2.7 kg
Pole pruner: FHE 2
Chain speed: max. 6 m/s
Working angle: 0–22.5°
Weight (ready for use): approx. 1.6 kg
Oil tank, recommended fill level: 100 ml
Cut length: approx. 260 mm
Blade: Oregon type 91 100SDEA041
Saw chain: Oregon 91P040X
Hedge trimmer: FHS 2
Idle stroke speed: 2000 rpm
Working angle: -45° - 90°
Cut length: 410 mm
Tooth spacing: 20 mm
Weight
(ready for use): approx. 2.1 kg
Noise and vibration information:
Measured sound value determined according to EN 60745. The A-rated
noise levels of the electrical power tool are tyoically at:
Pole pruner: FHE 2
Sound pressure level: L
PA
= 83 dB (A)
Uncertainty K: 3 dB
Sound power level: L
WA
= 104 dB (A)
Uncertainty K: 3 dB
Hedge trimmer: FHS 2
Sound pressure level: L
PA
= 81 dB (A)
Uncertainty K: 3 dB
Sound power level: L
WA
= 102 dB (A)
Guaranteed sound power level: L
WA
= 105 dB (A)
Uncertainty K: 3 dB
Vibration values (vector total of three directions) determined in accordance
with EN 60745:
Pole pruner:
Vibration on the front handle: Vibration emission value
a
h,D
= 1.0 m/s
2
Uncertainty K = 1.5 m/s
2
Vibration on the rear handle: vibration emission value
a
h,D
= 1.2 m/s
2
Uncertainty K = 1.5 m/s
2
Hedge trimmer:
Vibration on the front handle: Vibration emission value
a
h,D
= 1.6 m/s
2
Uncertainty K = 1.5 m/s
2
Vibration on the rear handle: Vibration emission value
a
h,D
= 1.8 m/s
2
Uncertainty K = 1.5 m/s
2
Wear ear protection!
NOTE
The vibration level specified in these instructions has been measured
in accordance with the standardised measuring procedure specified
in EN 60745 and can be used to make equipment comparisons. The
specified vibration emission value can also be used to make an initial
exposure estimate.
WARNING!
The vibration level will vary according to the use of the power tool
and may sometimes be higher than the value specified in these
instructions. Regular use of the power tool in such a way may cause
the user to underestimate the vibration. Try to keep the vibration
exposure as low as possible. Measures to reduce the vibration
exposure are, for example, wearing gloves and limiting the working
time. All states of operation must be considered (e.g. times when the
power tool is switched off and times where the power tool is switched
on but running without load).
Explanation of the symbols on the appliance:
Read the operating instructions and safety
advice before initial operation!
Wear protective gloves!
Wear safety shoes!
Wear ear protection!
Wear a hard hat!
Wear protective goggles!
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FHEHS 900 B2 - IAN 280236 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FHEHS 900 B2 - IAN 280236 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info