791812
15
Zoom out
Zoom in
Previous page
1/17
Next page
15
EN 3.6 Plug the transformer into the power socket.
NL 3.6 Steek de stekker in het stopcontact.
DE 3.6 Transformator mit Stromquelle verbinden.
FR 3.6 Branchez le transformateur dans la prise de courant.
IT 3.6 Inserire il trasformatore nella presa di alimentazione.
ES 3.6 Enchufe el transformador en la toma de corriente.
3 meter / 4 meter
EN STEP 4) Disassemble the flagpole (we recommend this step to be done by two people)
4.1 Turn off the power
4.2 Remove the plug from the power source
4.3 Detach the ropes from the ground pegs.
4.4 Loosen the wing nut on the ground spear and carefully lift the pole up and out of the ground spear. Place the flagpole flat on the
ground. Be careful that the ropes do not tangle into each other.
4.5 Unscrew the bottom pole (make sure to screw the bottom off from the rest of the pole, and not the opposite way, in order not to tangle
the ropes).
4.6 Unscrew the middle poles.
4.7 Leave the top pole and the ring attached to each other. This will make it easier to set up the pole for next season.
4.8 Leave the zip ties on.
4.9 Make sure all the ropes are sorted and neatly laid out next to each other on the ground. Fold the light chain from bottom to top in
pieces of about 1 meter. It is advisable to tie the bundle of wires together at each fold using a cord or colored tape.
NL STAP 4) Demonteer de vlaggenmast (wij raden aan deze stap door twee personen te laten uitvoeren)
4.1 Schakel de stroom uit
4.2 Verwijder de stekker uit de stroombron
4.3 Maak de touwen los van de grondpennen.
4.4 Draai de vleugelmoer op de grondspies los en til de mast voorzichtig omhoog en uit de grondspies. Leg de vlaggenmast plat op de
grond. Let op dat de touwen niet in elkaar verstrengelen.
4.5 Schroef de onderste mast los (zorg ervoor dat u de onderkant losschroeft van de rest van de mast, en niet de andere kant op, om te
voorkomen dat de touwen in de war raken).
4.6 Schroef de middelste stokken los.
4.7 Laat de bovenste paal en de ring aan elkaar vastzitten. Dit maakt het gemakkelijker om de paal voor het volgende seizoen op te zetten.
4.8 Laat de kabelbinders zitten.
4.9 Zorg ervoor dat alle touwen gesorteerd en netjes naast elkaar op de grond liggen. Vouw de lichtketting van onder naar boven in
stukken van ongeveer 1 meter. Het is raadzaam om de bundel draden bij elke vouw samen te binden met een koord of gekleurde tape.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FlinQ FQC8229 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FlinQ FQC8229 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info