Rated Power: 2x 5W
SNR (Signal Noice Ratio):>85db
Charging time: ≤2 hours
*Note: Depends on brand, phone model / type and volume settings
USER INSTRUCTIONS:
Charging mode:
Charge Fully before the first use!
Use the supplied micro USB cable and connect it with the headphone’s connection.
You can use any available USB power source with 5V power. The charging time is
approximately 3.5 hours. During the charging mode the LED light
will turn red. When it is fully charged, the LED is OFF.
Pairing the headphone by Bluetooth:
A. Press and hold the power button 3 seconds, when the headphone is off, to power
it ON.
B. The blue/red LED light will turn on and flashes quickly to indicate it is ready to
pair.
C. Open the Bluetooth menu in your device’s Bluetooth settings
D. When your mobile phone searches the headphone, the pairing name is “FlinQ
Headphone with ANC…. ”
E. Press this name and it will connect automatically, no password is needed. (if a
password is required please enter: 0000). After selecting the headphone you will
hear “Your headphones are connected” The blue LED light will flash 2x each 5
seconds to indicate it is successful connected.
Your headphones are ready to use!
Button operation instructions (make 1 – 4 clear on picture from the headphone’s
buttons):
1. To Power ON/OFF: Press and hold the POWER button around 3 seconds. You will
hear an audible message.
2. Previous song/ Volume - button :
